snmpwalk works cacti does not..

[Mystique]

I'm trying to monitor a dreaded mikrotik device.. but all I care about is the ethernet interfaces; its actually being used as a router (all vlans)

Code: Select all

snmpwalk -v2c -creadpass 1.2.3.4 .1.3.6.1.2.1.2.2.1.1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.18 = INTEGER: 18
IF-MIB::ifIndex.19 = INTEGER: 19
IF-MIB::ifIndex.20 = INTEGER: 20
IF-MIB::ifIndex.21 = INTEGER: 21
IF-MIB::ifIndex.22 = INTEGER: 22
IF-MIB::ifIndex.23 = INTEGER: 23
IF-MIB::ifIndex.24 = INTEGER: 24
IF-MIB::ifIndex.25 = INTEGER: 25
IF-MIB::ifIndex.26 = INTEGER: 26
IF-MIB::ifIndex.27 = INTEGER: 27
IF-MIB::ifIndex.28 = INTEGER: 28
IF-MIB::ifIndex.30 = INTEGER: 30
IF-MIB::ifIndex.32 = INTEGER: 32
IF-MIB::ifIndex.33 = INTEGER: 33
IF-MIB::ifIndex.34 = INTEGER: 34
IF-MIB::ifIndex.35 = INTEGER: 35

yet cacti on the same machine says it returns 0 results..

Where to start figuring this out?..

Thanks in advance.