Can't Graph Juniper ERX-1400 Edge

[hassanhija]

Hello .....

I face a problem in monitoring Juniper ERX-1400 Edge Routing Switch
the problem is that the interfaces are not shown !!

The below is verbose query of the snmp interfaces.

Please note that when i make snmpwalk command on the server it ghather the interfaces info.

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at 'C:/Inetpub/wwwroot/cacti/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ No SNMP data returned
+ Found data query XML file at 'C:/Inetpub/wwwroot/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at 'C:/Inetpub/wwwroot/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at 'C:/Inetpub/wwwroot/cacti/resource/snmp_queries/interface.xml'


My Cacti version is 0.8.7e

please if you have any ideas provide me with fully details.

[gandalf]

Which SNMP version are you using?
R.

[hassanhija]

SNMP V2

[hassanhija]

Dears ......
please any update ????? i need to see the interfaces on ERX-1400 Edge
device????

[gandalf]

Please reduce the MAX OID for that host to 1 and retry
R.

[hassanhija]

Dear gandalf ,
Thank you for your interest but let me inform you that i reduced the MAX OID for that host to 1 . but unfortionatly i didn't received any interfaceses please see the attached images .
[/code]

[hassanhija]

Please any idea ???? i need to monitor this device and hope to cactch any highlight

[terziyski]

Assure yourself that you have an SNMP access to your device first (ACL, firewall etc.)!
After that, if you are using your Juniper Edge router as a BRAS you should try to reduce the number of monitored interfaces like that:
For example:
snmp-server interfaces compress Ip
snmp-server interfaces compress Ppp
snmp-server interfaces compress PppoeSub

and try again to query the interfaces.