Nortel

jackey · Post by **jackey** » Thu Jul 23, 2009 7:53 pm

Hi Guys:

I need Nortel Passport 6400 Template , who can help me!!

thanks!!

Howie · Post by **Howie** » Fri Jul 24, 2009 1:22 am

What do you need to monitor? The standard interface traffic template should work for the actual traffic.

jackey · Post by **jackey** » Tue Jul 28, 2009 8:44 pm

Howie wrote:What do you need to monitor? The standard interface traffic template should work for the actual traffic.

Hi

Because I need to monitor Passport-6400 PVC traffic In/Out , I try many

times , but can't get information from Passport-6400 , I think standard

can't use , Do you have any suggest ??

streaker69 · Post by **streaker69** » Tue Jul 28, 2009 9:12 pm

It doesn't appear to be a template error, it appears as though you either have the wrong community string for SNMP or SNMP isn't enabled on the device.

jackey · Post by **jackey** » Wed Jul 29, 2009 12:45 am

streaker69 wrote:It doesn't appear to be a template error, it appears as though you either have the wrong community string for SNMP or SNMP isn't enabled on the device.

Hi...

I have double confirm my Passport-6400 community , But still can't get

PVC traffic , I can not figure out other ways , Have you ever met similar

condition ??

Howie · Post by **Howie** » Wed Jul 29, 2009 2:16 am

Until you can get the SNMP message at the top of the devices screen to look something like my other one, don't worry about specific OIDs on the passport. The SNMP agent isn't configured correctly, or there is some firewall between the Cacti server and the switch, or the Cacti SNMP settings are wrong.

Simple things to check - does it need to be SNMP v2c instead of v1? Is the community string right? Can you use snmpwalk from a command-line on the Cacti server to read any info from the switch?

jackey · Post by **jackey** » Wed Jul 29, 2009 2:49 am

Howie wrote:Until you can get the SNMP message at the top of the devices screen to look something like my other one, don't worry about specific OIDs on the passport. The SNMP agent isn't configured correctly, or there is some firewall between the Cacti server and the switch, or the Cacti SNMP settings are wrong.

Simple things to check - does it need to be SNMP v2c instead of v1? Is the community string right? Can you use snmpwalk from a command-line on the Cacti server to read any info from the switch?

Hi...

I just double confirm any setting , Cacti & Passport & IP & SNMP-V1 or

V2c & Community , But still can't get Passport6440 traffic .

I know SNMP-Information should be show device information , but try

many times ...

My device is Nortel-Multi-Service-Switch-Network Type:Passport-6440.

PS:Now , I have Passport 8610 - Core-SW , Cacti can get this device

streaker69 · Post by **streaker69** » Wed Jul 29, 2009 7:28 am

jackey wrote:
Howie wrote:Until you can get the SNMP message at the top of the devices screen to look something like my other one, don't worry about specific OIDs on the passport. The SNMP agent isn't configured correctly, or there is some firewall between the Cacti server and the switch, or the Cacti SNMP settings are wrong.

Simple things to check - does it need to be SNMP v2c instead of v1? Is the community string right? Can you use snmpwalk from a command-line on the Cacti server to read any info from the switch?
Hi...

I just double confirm any setting , Cacti & Passport & IP & SNMP-V1 or

V2c & Community , But still can't get Passport6440 traffic .

I know SNMP-Information should be show device information , but try

many times ...

My device is Nortel-Multi-Service-Switch-Network Type:Passport-6440.

PS:Now , I have Passport 8610 - Core-SW , Cacti can get this device

Can you do an SNMPWalk of the device from a terminal? Remember that the community string is case sensitive as well.

jackey · Post by **jackey** » Thu Jul 30, 2009 3:37 am

streaker69 wrote:
jackey wrote:
Howie wrote:Until you can get the SNMP message at the top of the devices screen to look something like my other one, don't worry about specific OIDs on the passport. The SNMP agent isn't configured correctly, or there is some firewall between the Cacti server and the switch, or the Cacti SNMP settings are wrong.

Simple things to check - does it need to be SNMP v2c instead of v1? Is the community string right? Can you use snmpwalk from a command-line on the Cacti server to read any info from the switch?
Hi...

I just double confirm any setting , Cacti & Passport & IP & SNMP-V1 or

V2c & Community , But still can't get Passport6440 traffic .

I know SNMP-Information should be show device information , but try

many times ...

My device is Nortel-Multi-Service-Switch-Network Type:Passport-6440.

PS:Now , I have Passport 8610 - Core-SW , Cacti can get this device
Can you do an SNMPWalk of the device from a terminal? Remember that the community string is case sensitive as well.

HI...

Today I try SNMPWalk of the device from Passport-6400 , but still can't work on Cacti .... tomorrow I will try more times...

jackey · Post by **jackey** » Mon Aug 03, 2009 9:08 pm

I really can't get my device Nortel Passport 6400 template , somebody can help me more !!

Howie · Post by **Howie** » Tue Aug 04, 2009 2:25 am

Can you do an SNMPWalk of the device from a terminal? Remember that the community string is case sensitive as well.

You didn't answer. Can you do a snmpwalk from the Cacti server?

If you can't, then your problem is not a Cacti problem. Perhaps you should talk to Nortel about configuring SNMP on the switch or reporting the bug.

If you can, then it probably is a Cacti problem.

jackey · Post by **jackey** » Tue Aug 04, 2009 2:55 am

Howie wrote:
Can you do an SNMPWalk of the device from a terminal? Remember that the community string is case sensitive as well.
You didn't answer. Can you do a snmpwalk from the Cacti server?

If you can't, then your problem is not a Cacti problem. Perhaps you should talk to Nortel about configuring SNMP on the switch or reporting the bug.

If you can, then it probably is a Cacti problem.

Hi...

Appreciate your full support , I already call Nortel company , tell they is

problem , if debug finish still have question , I will try more times !!

jackey · Post by **jackey** » Tue Aug 18, 2009 3:02 am

Appreciate everybody full support !!

I can get my device Nortel-Passport-6400 SNMP !!

Howie · Post by **Howie** » Tue Aug 18, 2009 3:48 am

Please post the solution, so other people could benefit...

Nortel

Nortel

Who is online