Graphs writing to wrong path?

[ctheory]

Fresh install, WinServ2003 with Wamp, Spine, 0.8.7.e and all that good stuff.

Everything is alive, it seems to be polling correctly, but i'm not getting any graphs.

The only thing that catches my eye as "off" is this:

07/09/2009 02:22:30 PM - WEBLOG: Poller[0] CACTI2RRD: F:\wamp\www\cacti\rrdtool\rrdtool.exe fetch F:/wamp/www/cacti/rra/station_1_foundry_traffic_in_17.rrd AVERAGE -s 1247160144

-e 1247163744
07/09/2009 02:22:30 PM - WEBLOG: Poller[0] CACTI2RRD: F:\wamp\www\cacti\rrdtool\rrdtool.exe fetch F:/wamp/www/cacti/rra/station_1_foundry_traffic_in_16.rrd AVERAGE -s 1247160144

-e 1247163744
07/09/2009 02:22:30 PM - WEBLOG: Poller[0] CACTI2RRD: F:\wamp\www\cacti\rrdtool\rrdtool.exe fetch F:/wamp/www/cacti/rra/station_1_foundry_traffic_in_15.rrd AVERAGE -s 1247160144

-e 1247163744
07/09/2009 02:22:30 PM - WEBLOG: Poller[0] CACTI2RRD: F:\wamp\www\cacti\rrdtool\rrdtool.exe fetch F:/wamp/www/cacti/rra/station_1_foundry_traffic_in_14.rrd AVERAGE -s 1247160144

-e 1247163744

Attached is my log file - perhaps you've had the same problem? I've went through permissions, i've went through directories... i'm just at a bit of a loss after struggling all morning to put cacti back together.

[ctheory]

I see:

DEF:a="F\:/wamp/www/cacti/rra/foundry_traffic_in_20.rrd" and i'm thinking this is my problem... but I am not sure how it is referenced.

07/09/2009 03:08:20 PM - WEBLOG: Poller[0] CACTI2RRD: F:\wamp\www\cacti\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=1247162890 --end=1247166490 --title="Station 1 Foundry - Traffic - ethernet7" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2009/07/09 14:08:10 To 2009/07/09 15:08:10\c" COMMENT:" \n" --vertical-label="bits per second" DEF:a="F\:/wamp/www/cacti/rra/foundry_traffic_in_20.rrd":traffic_in:AVERAGE DEF:b="F\:/wamp/www/cacti/rra/station_1_foundry_traffic_in_20.rrd":traffic_out:AVERAGE CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* AREA:cdefa#00CF00:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf%s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf%s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf%s\n" LINE1:cdefe#002A97:"Outbound" GPRINT:cdefe:LAST:"Current\:%8.2lf%s" GPRINT:cdefe:AVERAGE:"Average\:%8.2lf%s" GPRINT:cdefe:MAX:"Maximum\:%8.2lf%s\n" HRULE:0#FF0000:"95th Percentile" COMMENT:"(0 mbit in+out)\n"

[ctheory]

Alright, I certainly feel stupid. I overlooked the RRDTool setting, i'm using 1.2.x and it was set to 1.0.x, i'm wondering if this will fix it...

[BSOD2600]

WEBLOG entries aren't very useful. Turn on graph debugging and find out why they're failing. Also read http://forums.cacti.net/viewtopic.php?t=11747