Detailed graphs are not showing up on the screen

[FizHaq]

I have configure graphs in Cacti to monitor Internal temerature of HP Servers. It is showing me graph for each server correctly, for which I am very please.

But when I am clicking on the graph to see Hourly, Daily, weekly, monthly and yearly graphs, they are not appearing on the screen despite the fact excel sheet associated with it has all the correct figures in it.

By clicking on button of Graph Source/Properties, its giving me this output:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-14400 \
--end=-300 \
--title="UKDCWEB02 - IO-Board Temperature Proliant" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="Celsius" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:8: \
--font UNIT:8: \
DEF:a="C\:/Inetpub/wwwroot/cacti/rra/ukdcweb02_cpqhetemperaturecel_3484.rrd":cpqHeTemperatureCel:AVERAGE \
AREA:a#FF0000FF:"Temperature in Degrees Celsius" \
GPRINT::LAST:"Current\:%8.2lf %s" \
GPRINT::AVERAGE:"Average\:%8.2lf %s" \
GPRINT::MAX:"Maximum\:%8.2lf %s\n"

If I turn on graph debug mode, I can see following error:

RRDTool Command:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="UKDCWEB01 - IO-Board Temperature Proliant" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="Celsius" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:8: \
--font UNIT:8: \
DEF:a="C\:/Inetpub/wwwroot/cacti/rra/ukdcweb01_cpqhetemperaturecel_3485.rrd":cpqHeTemperatureCel:AVERAGE \
AREA:a#FF0000FF:"Temperature in Degrees Celsius" \
GPRINT::LAST:"Current\:%8.2lf %s" \
GPRINT::AVERAGE:"Average\:%8.2lf %s" \
GPRINT::MAX:"Maximum\:%8.2lf %s\n"
RRDTool Says:

ERROR: Could not parse line 'GPRINT::LAST:Current\:%8.2lf %s'

What can be the reason? Any help will be highly appricated....

[BSOD2600]

Generic question, moving.

1) make sure the correct rrdtool version is set in cacti.
2) go through each item in that hp graph template, click on each Item # and then save.