Interface Graphs Not Showing

Post support questions that directly relate to Linux/Unix operating systems.

Moderators: Developers, Moderators

Post Reply
dbunyard
Posts: 11
Joined: Wed Sep 03, 2008 9:48 am
Location: Mount Gilead, OH

Interface Graphs Not Showing

Post by dbunyard »

This has been a problem for a little while now and after the upgrade to 0.8.7d didn't resolve it I though I would try to get some help. It seems like none of my interface graphs are working and they aren't even being created. The debug output for one of the graph is as follows:

Code: Select all

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-60 \
--title="Dan Bunyard - Traffic - 10.37.58.80 (Intel(R) PRO/10)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/www/html/cacti/rra/dan_bunyard_traffic_in_490.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/html/cacti/rra/dan_bunyard_traffic_in_490.rrd":traffic_out:AVERAGE \
DEF:c="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":AlignmentErrors:AVERAGE \
DEF:d="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":CarrierSenseErrors:AVERAGE \
DEF:e="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":DeferredTrans:AVERAGE \
DEF:f="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":ExcessiveCollision:AVERAGE \
DEF:g="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":FCSErrors:AVERAGE \
DEF:h="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":FrameTooLongs:AVERAGE \
DEF:i="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":MultipleCollFrames:AVERAGE \
DEF:j="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":SingleCollisionFra:AVERAGE \
DEF:ba="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":SQETestErrors:AVERAGE \
DEF:bb="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":LateCollisions:AVERAGE \
DEF:bc="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":IntMacReceiveErr:AVERAGE \
DEF:bd="/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd":IntMacTransmitErr:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
CDEF:cdefj=c,8,* \
CDEF:cdefba=b,8,*,-1,* \
CDEF:cdefbe=d,8,* \
CDEF:cdefbi=e,8,* \
CDEF:cdefcc=f,8,* \
CDEF:cdefcg=g,8,* \
CDEF:cdefda=h,8,* \
CDEF:cdefde=i,8,* \
CDEF:cdefdi=j,8,* \
CDEF:cdefec=ba,8,* \
CDEF:cdefeg=bb,8,* \
CDEF:cdeffa=bc,8,* \
CDEF:cdeffe=bd,8,* \
AREA:cdefa#00CF00FF:"Inbound"  \
GPRINT:cdefa:LAST:"                    Current\:%8.2lf %s"  \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n"  \
LINE1:cdefe#002A97FF:"Outbound"  \
GPRINT:cdefe:LAST:"                   Current\:%8.2lf %s"  \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"  \
LINE1:cdefa#000000FF:""  \
LINE2:cdefj#dd0000FF:"Alignment Errors"  \
LINE1:cdefba#000000FF:""  \
GPRINT:cdefj:LAST:"                           Current\:%8.2lf %s"  \
GPRINT:cdefj:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefj:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefbe#FFFF00FF:"CarrierSenseErrors"  \
GPRINT:cdefbe:LAST:"         Current\:%8.2lf %s"  \
GPRINT:cdefbe:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefbe:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefbi#CDCFC4FF:"Deferred Transmissions"  \
GPRINT:cdefbi:LAST:"     Current\:%8.2lf %s"  \
GPRINT:cdefbi:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefbi:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefcc#000000FF:"Excessive Collisions"  \
GPRINT:cdefcc:LAST:"       Current\:%8.2lf %s"  \
GPRINT:cdefcc:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefcc:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefcg#FF897CFF:"FCS Errors"  \
GPRINT:cdefcg:LAST:"                 Current\:%8.2lf %s"  \
GPRINT:cdefcg:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefcg:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefda#CCBB00FF:"FrameTooLongs"  \
GPRINT:cdefda:LAST:"              Current\:%8.2lf %s"  \
GPRINT:cdefda:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefda:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefde#008A77FF:"Multiple Collision Frames"  \
GPRINT:cdefde:LAST:"  Current\:%8.2lf %s"  \
GPRINT:cdefde:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefde:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefdi#00A0C1FF:"Single Collision Frames"  \
GPRINT:cdefdi:LAST:"    Current\:%8.2lf %s"  \
GPRINT:cdefdi:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefdi:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefec#0000FFFF:"SQE Test Errors"  \
GPRINT:cdefec:LAST:"            Current\:%8.2lf %s"  \
GPRINT:cdefec:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefec:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdefeg#FAFD9EFF:"Late Collisons"  \
GPRINT:bb:LAST:"             Current\:%8.2lf %s"  \
GPRINT:cdefeg:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefeg:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdeffa#aaaa00FF:"Internal MACReceive Errors"  \
GPRINT:cdeffa:LAST:" Current\:%8.2lf %s"  \
GPRINT:bc:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdeffa:MAX:"Maximum\:%8.2lf %s\n"  \
LINE2:cdeffe#D8ACE0FF:"Internal MACTransmit Errors"  \
GPRINT:cdeffe:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdeffe:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdeffe:MAX:"Maximum\:%8.2lf %s\n" 
RRDTool Says:

ERROR: opening '/var/www/html/cacti/rra/dan_bunyard_intmacreceiveerr_491.rrd': No such file or directory
All the other graphs appear to be working. I have bee round and round with this and can't seem to come up with a reason why it's failing. Anyone have any thoughts? This is my system config:
Cacti Version - 0.8.7d
Plugin Architecture - 2.4
Poller Type - CMD.php
Server Info - Linux 2.6.27.12-170.2.5.fc10.i686
Web Server - Apache/2.2.10 (Fedora)
PHP - 5.2.6
PHP Extensions - libxml, xml, wddx, tokenizer, sysvshm, sysvsem, sysvmsg, session, pcre, SimpleXML, sockets, SPL, shmop, standard, Reflection, posix, iconv, hash, gmp, gettext, ftp, filter, exif, date, curl, ctype, calendar, bz2, zlib, openssl, apache2handler, dbase, json, ldap, mbstring, mcrypt, mysql, mysqli, PDO, pdo_mysql, pdo_sqlite, snmp, zip
MySQL - 5.0.67
RRDTool - 1.3.4
SNMP - 5.4.2.1
Plugins
  • Global Plugin Settings (settings - v0.5)
    Network Tools (tools - v0.3)
    Update Checker (update - v0.4)
    Network Discovery (discovery - v0.8.5)
    Documents (docs - v0.1)
    Host Info (hostinfo - v0.2)
    Device Tracking (mactrack - v1.1)
    Device Monitoring (monitor - v0.8.2)
    Thresholds (thold - v0.4.1)
Thanks
Dan
Top
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:
Contact gandalf

Post by gandalf »

Please see 2nd link of my sig for help
Reinhard
Top
dbunyard
Posts: 11
Joined: Wed Sep 03, 2008 9:48 am
Location: Mount Gilead, OH

Post by dbunyard »

I found it, for whatever reason the "SNMP - Interface Statistics" Data Query had "path_cacti" rather than "<path_cacti>" at the start of it so it couldn't find the XML file. Not sure how that happened, but it did.... Thanks for the help!
Dan
Top
Post Reply

Return to “Help: Linux/Unix Specific”

Who is online

Users browsing this forum: No registered users and 0 guests