Hi,
I have been trying for a while now to get regular OIDs to work in Cacti. I perform the following:
Create new device entering the hostname, template of Generic SNMP enabled host, SNMP version 1, community public
Create new graph with SNMP - Generic OID template, title, name and OID.
When i apply this the debug always comes back with ERROR: opening '/var/www/html/rra/ip9216_snmp_oid_120.rrd': No such file or directory
Seems to be the case with ANY that i enter even though with a SNMPwalk i get the correct value returned.
Can anyone help me? Is their something that i`m not fundementally doing?
Many thanks,
Generic SNMP OIDS - Getting it to work
Moderators: Developers, Moderators
Check the poller output in the cacti.log. Try turning up the log verbosity under "Settings" -> "General" -> "Poller Specific Logging". Let it run a polling cycle and check the log file.
Some things to check:
Is "Data Source Active" checked?
Can you retrieve the snmp data from the OID manually? (snmpget)
Is your minimum and maximum within range? (The default generic template max is 100, if your returned value is greater than the max it wont be entered)
Adam
Some things to check:
Is "Data Source Active" checked?
Can you retrieve the snmp data from the OID manually? (snmpget)
Is your minimum and maximum within range? (The default generic template max is 100, if your returned value is greater than the max it wont be entered)
Adam
-
- Posts: 5
- Joined: Tue May 13, 2008 8:14 am
-
- Posts: 5
- Joined: Tue May 13, 2008 8:14 am
Who is online
Users browsing this forum: No registered users and 3 guests