The OID's work fine when graphed individually.
I changed the OID and name but now get an error on DS DEF a
Not sure where to begin.
output from Graph debug mode is shown below.
RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="HHG-3825-HHGLLGW01 - Channels in Use" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/www/html/rra/hhg-3825-hhgllgw01_cisco_3825_actchan__941.rrd":Cisco 3825_actchan_:AVERAGE \
DEF:b="/var/www/html/rra/hhg-3825-hhgllgw01_cisco_3825_actchan__942.rrd":Cisco 3825_actchan_:AVERAGE \
DEF:c="/var/www/html/rra/hhg-3825-hhgllgw01_cisco_3825_actchan__943.rrd":Cisco 3825_actchan_:AVERAGE \
DEF:d="/var/www/html/rra/hhg-3825-hhgllgw01_cisco_3825_actchan__944.rrd":Cisco 3825_actchan_:AVERAGE \
CDEF:cdefbg=TIME,1233608790,GT,a,a,UN,0,a,IF,IF,TIME,1233608790,GT,b,b,UN,0,b,IF,IF,TIME,1233608790,GT,c,c,UN,0,c,IF,IF,TIME,1233608790,GT,d,d,UN,0,d,IF,IF,+,+,+ \
AREA:a#FF4105FF:"T1 1/0\:" \
GPRINT
GPRINT
GPRINT
AREA:b#96E78AFF:"T1 1/1\:":STACK \
GPRINT
GPRINT
GPRINT
AREA:c#FFFF00FF:"T1 2/0\:":STACK \
GPRINT:c:LAST:"Current\:%8.2lf %s" \
GPRINT:c:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:c:MAX:"Max\:%8.2lf %s\n" \
AREA:d#6DC8FEFF:"T1 2/1\:":STACK \
GPRINT:d:LAST:"Current\:%8.2lf %s" \
GPRINT:d:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:d:MAX:"Max\:%8.2lf %s\n" \
LINE1:cdefbg#000000FF:"Total\:" \
GPRINT:cdefbg:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefbg:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefbg:MAX:"Max\:%8.2lf %s"
RRDTool Says:
ERROR: Cannot parse DS in 'DEF:a=/var/www/html/rra/hhg-3825-hhgllgw01_cisco_3825_actchan__941.rrd:Cisco'