No graph displayed

[Det]

Dear All,

I have successfully tested cacti 0.8.7b on Fedora 9, but when I install and configured it on Fedora 9, I got some problems. when I created device, it work seem to be no problem, but when I view graph in graph management with turn on graph debug on it I got no graph with the result of debug below:

=====================

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="PNM-MO-7206-Backbone - Gi0/1.101 - To Viettel (203.113.185.234)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:10.2: \
--font UNIT:8: \
DEF:a="/var/www/html/cacti/rra/pnm-mo-7206-backbone_traffic_in_11.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/html/cacti/rra/pnm-mo-7206-backbone_traffic_in_11.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

RRDTool Says:

==================

RRDtool said nothing. As I experiences with installed it on Fedora 9, if I do like this, I will get the very much similar result but RRDTool say OK.
but now I got nothing, I don't know why? And how can I check whether Poller is running or not?

[Det]

I just found the error of my RRDTool in System Utilities ==> Technical Support ==> RRDTool Version I got the below error message:

ERROR: Installed RRDTool version does not match configured version.
Please visit the Configuration Settings and select the correct RRDTool Utility Version.

I have selected the version of RRDTool in Settings Menu to: RRDTool 1.2.X and my current version that I am using is : RRDTool 1.2.23. It should be correct but I don't know why I get this error?

Please kindly help.

[gandalf]

Copy the command and run it from cli. Pipe output to /some/file.png. Any error message?
Reinhard

[Borin]

Hi,

I already solved my problem, Thanks for you reply

Bye