[TODO] No "VLAN Name"

blugger · Post by **blugger** » Thu May 22, 2008 8:59 am

Hi everybody,

I installed "mactrack-1.1.tar.gz"

Everything is working fine, but I do not see any "Vlan name:" information. The drop down menu only shows "All".

Maybe somebody can help me.

BR
Benjamin

blugger · Post by **blugger** » Thu May 22, 2008 9:28 am

Hi again,

I experienced the following.

I did the "php database_upgrade.php".

After that the VLAN information was shown.

But after the poller run again, the VLAN information was missing again.

PLEASE HEEELP!

blugger · Post by **blugger** » Sun May 25, 2008 11:51 am

No answers ???

blugger · Post by **blugger** » Thu Oct 16, 2008 1:16 pm

I solved the problem by my self.

You can show the mac-addresses separated by either ":" or "-".

If you choose "-" the vlan names are not shown anymore.

Take care.

BR
Benjamin

Post by **TheWitness** » Sat Apr 11, 2009 10:17 am

Benjamin,

What did you change. I am currently working on 2.0 and I don't want this to slip.

TheWitness

blugger · Post by **blugger** » Sat Apr 11, 2009 11:25 am

Hi!

First of all, it is nice to hear that you are working on 2.0.

In general I just recognized that I did not get the VLAN names when I choose "-" within the mactrack settings. As a result I changed it back to ":".

BR
Benjamin

Post by **TheWitness** » Sat Apr 11, 2009 2:28 pm

Ok, I see the problem then...

Cacti

[TODO] No "VLAN Name"

[TODO] No "VLAN Name"

Update

Hello again...

solved...

FYI ...

Who is online