no data in graphs

malibumaniac · Post by **malibumaniac** » Tue Apr 08, 2008 8:36 am

ive installed cacti on a windows machine, and added some templates.

now im looking in them and after half an hour the graphs are still empty, as well the data under the graphs is being displayed incorrect.

what can i do?

samapi123 · Post by **samapi123** » Tue Apr 08, 2008 10:25 am

You can read. I had the same problem and I posted.

http://forums.cacti.net/viewtopic.php?t ... c&start=30

Did you specify a valid username/password for the cacti scheduled task? That solved my problem.

malibumaniac · Post by **malibumaniac** » Tue Apr 08, 2008 11:45 am

just re-created the task with manual (some ntfs rights arnt correct) and before i used a bat file for it.. now its the way of the manual...

samapi123 · Post by **samapi123** » Tue Apr 08, 2008 11:49 am

Did you see that task is running?

You need to see in your task something like this..

BSOD2600 · Post by **BSOD2600** » Tue Apr 08, 2008 12:06 pm

read http://forums.cacti.net/viewtopic.php?t=11747 ENTIRELY and repost.

malibumaniac · Post by **malibumaniac** » Wed Apr 09, 2008 8:39 am

BSOD2600 wrote:read http://forums.cacti.net/viewtopic.php?t=11747 ENTIRELY and repost.

im not able to provide all info.

im using newest version of cacti on windows XP.

using php5 and apache 2.

ive found out in debug mode the following on our not displayed win2k3

+ No SNMP data returned

BSOD2600 · Post by **BSOD2600** » Wed Apr 09, 2008 12:22 pm

malibumaniac wrote:im not able to provide all info.

Why not? If you're unable to figure it out, then you shouldn't be running Cacti, IMO.

malibumaniac wrote: ive found out in debug mode the following on our not displayed win2k3

+ No SNMP data returned

Sounds like you haven't configured the snmp service on windows. read microsoft's guides on how this is done. There is also an entry in my FAQ (bottom of the installation guide).

malibumaniac · Post by **malibumaniac** » Thu Apr 10, 2008 1:23 am

i'll be able to provide it, only some info i dont know exactly. Its just that im new to the whole cacti running on windows FOR windows..

used it before for linux and cisco's and that was running great!

i'll read your manual for setting up snmp.

thanks.

malibumaniac · Post by **malibumaniac** » Thu Apr 10, 2008 1:40 am

Thanks BSOD!

i've found all info for windows how-to, but just as an little tip,
maybe you can also link to the MS technet about how to install it

http://technet2.microsoft.com/windowsse ... x?mfr=true

malibumaniac · Post by **malibumaniac** » Thu Apr 10, 2008 3:39 am

i've found out some graphs are working right now, only the w2k3 uptime graph isnt.

i've found out that this one is saying

C:\htdocs\cacti\scripts\uptime>win_uptime.cmd 172.19.37.5 99.99
Couldn't get it! at C:\xampp\htdocs\cacti\scripts\uptime\win_uptime.pl line 20
sla_avail:99.99

i've checked that file, and serveral topc about this, but everythink looks fine.. what should i do?

BSOD2600 · Post by **BSOD2600** » Thu Apr 10, 2008 3:13 pm

Well something is obviously wrong with that perl script, on line 20. I suggest you post the question on the post where you got that script and/or try to debug the script yourself. That's kind of ridiculous, a batch script, invoking a perl script which does who knows what. Microsoft's uptime.exe tool provides uptime data, which could be easily wrapped into a .cmd script...

malibumaniac · Post by **malibumaniac** » Wed Apr 23, 2008 3:11 am

its running on the windows uptime script i've found on the forum over here.

the .exe you called is also in into it... but on the topic of the script im getting no response...

no data in graphs

no data in graphs

Who is online