I couldn't create Thresholds

mercolino · Post by **mercolino** » Wed Sep 12, 2007 5:28 pm

Hi to all, I installed SETTINGS and THOLD plugins in CACTI, I know that the architecture is installed right because I am running weathermap without a problem. So teh plugin created Threshold and Threshold Template Menu in Cacti, that means that I could create Thresholds templates but I can not find how to assign that template to a device. When I go to Devices, "create graphs for this host" doesn't appear "auto create thresholds". I reinstalled the plugin several times but doesn't work.

Any idea would be appreciated.

Thanks
mercolino

mcutting · Post by **mcutting** » Thu Sep 13, 2007 1:41 am

mercolino - Did you apply the realm permissions for the user you are logged on with to access THOLD ? Do this from User Management, select user, and then tick all the boxes that relate to THOLD.

mercolino · Post by **mercolino** » Thu Sep 13, 2007 8:07 am

mcutting wrote:mercolino - Did you apply the realm permissions for the user you are logged on with to access THOLD ? Do this from User Management, select user, and then tick all the boxes that relate to THOLD.

Yes, is marked View Thresholds and Configure Thresholds, in fact I can see the menu in the lef and the tab on the top.

Thanks
Mercolino

mcutting · Post by **mcutting** » Thu Sep 13, 2007 8:14 am

So - does the plugin work correctly now ?

mercolino · Post by **mercolino** » Thu Sep 13, 2007 8:16 am

mcutting wrote:So - does the plugin work correctly now ?

Sorry

, No I still can't apply the thresholds templates, I mean that the boxes are marked so that is not the problem...

Regards
Mercolino

mcutting · Post by **mcutting** » Thu Sep 13, 2007 8:31 am

Mercolino - Under MANAGEMENT, click "Thresholds" - follow the wizard ss shown below....

mercolino · Post by **mercolino** » Thu Sep 13, 2007 8:51 am

mcutting wrote:Mercolino - Under MANAGEMENT, click "Thresholds" - follow the wizard ss shown below....

That is the problem the button or link called: Auto-create thresholds does not appear

mcutting · Post by **mcutting** » Thu Sep 13, 2007 9:04 am

Ok - try clicking on a device, then click "Create Graphs For This Host". Do you see the option to apply Thresholds now ??

mercolino · Post by **mercolino** » Thu Sep 13, 2007 9:06 am

Nope.....

mcutting · Post by **mcutting** » Thu Sep 13, 2007 9:07 am

Are you sure that you are currently graphing for this particular host what you want to apply a threshold template for ?

mercolino · Post by **mercolino** » Thu Sep 13, 2007 9:17 am

mcutting wrote:Are you sure that you are currently graphing for this particular host what you want to apply a threshold template for ?

Yes, I create a Ping Threshold template, And I am graphing the Ping latency for that device, I am attaching some screenshots

mcutting · Post by **mcutting** » Thu Sep 13, 2007 9:21 am

What version of Threshold are you running ? Mine is 0.3.4 - I had too many issues with the latest 0.3.5.2..

mercolino · Post by **mercolino** » Thu Sep 13, 2007 9:45 am

mcutting wrote:What version of Threshold are you running ? Mine is 0.3.4 - I had too many issues with the latest 0.3.5.2..

Yes, mine is 0.3.5.2 is the only one that I found in cactiusers.org, where I can find 0.3.4 to test it?

thanks
mercolino

mcutting · Post by **mcutting** » Thu Sep 13, 2007 9:48 am

Have a look at cactiusers.org - you can download it there. It is still listed in the forums (download link)

mercolino · Post by **mercolino** » Thu Sep 13, 2007 10:42 am

mcutting wrote:Have a look at cactiusers.org - you can download it there. It is still listed in the forums (download link)

I installed the version 0.3.4 and still the same problem.

Regards
Mercolino

I couldn't create Thresholds

I couldn't create Thresholds

Who is online