SNMP - Interface Statistics, END OF MIB

[k_grdn]

Hi,

Can any shed some light on end of mib error, is the the end of the index?

I can poll interfaces on some servers but not this particular machine, debug:

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Found item [ifName='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Found item [ifAlias='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr='End of MIB'] index: End of MIB [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'
+ Found item [ifIP='End of MIB'] index: 1 [from regexp oid parse]
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'

This machine is my firewall/router and I would really like to monitor the traffic/interfaces.

Any help appreciated.

Regards,

k_grdn

[k_grdn]

The problem servers are ubuntu dapper, may be smpd.conf configuration?

I can poll SLES servers interfaces without problems.

k_grdn

[k_grdn]

Hey,

The problem was with the snmpd.conf access parameters, needed to allow readonly to my polling host, because other stats where being returned I firstly dis-guarded this.

Regards,

k_grdn