Hi,
Has anyone got any knowledge of a script/templates for the belkin UPS bulldog program? It works much like NUT, but I can't seem to make the generic NUT scripts work with my Bulldog setup. The upsd doesn't seem to work on the standard port. I know that my UPS supports SNMP by some means, but I really can't get it to play right!
Thanks!
Belkin UPS Bulldog
Moderators: Developers, Moderators
-
- Posts: 1
- Joined: Sun Aug 05, 2007 1:58 pm
- Contact:
I take the opportunity of this post to release the host templates I made for both MGE UPS and any UPS supporting IETF RFC 1628 MIB.
These have been tested against MGE UPS models Comet, Pulsar and a few other I don't remember (customer's site having more than 100 UPS). Recent MGE models seems to not behave very well even though I used official MGE papers documenting their MIBs. For instance, provide frequency * 10 (for precision purpose) but not the newer. So you may have to tweak templates a bit.
These templates should give you information about battery (level, remaining time, time to full charge), input and output line information (voltage, current, frequency) and when supported, temperature.
In your specific case, you could try the IETF RFC 1628 host template on you Belkin UPS.
All you have to do is import the host templates and copy the snmp data queries in ${CACTIBASE}/resource/snmp_queries/ and you're all set.
These have been tested against MGE UPS models Comet, Pulsar and a few other I don't remember (customer's site having more than 100 UPS). Recent MGE models seems to not behave very well even though I used official MGE papers documenting their MIBs. For instance, provide frequency * 10 (for precision purpose) but not the newer. So you may have to tweak templates a bit.
These templates should give you information about battery (level, remaining time, time to full charge), input and output line information (voltage, current, frequency) and when supported, temperature.
In your specific case, you could try the IETF RFC 1628 host template on you Belkin UPS.
All you have to do is import the host templates and copy the snmp data queries in ${CACTIBASE}/resource/snmp_queries/ and you're all set.
- Attachments
-
- cacti_host_template_ietf_rfc_1628.xml
- RFC 1628 host template
- (82.43 KiB) Downloaded 500 times
-
- cacti_host_template_mge_ups.xml
- MGE UPS host template
- (108.07 KiB) Downloaded 315 times
-
- ietf_input_phase.xml
- RFC 1628 snmp data query
- (1.3 KiB) Downloaded 245 times
-
- ietf_output_phase.xml
- RFC 1628 snmp data query
- (1.3 KiB) Downloaded 241 times
-
- mge_environ_sensor.xml
- MGE UPS snmp data query (for temp)
- (1.03 KiB) Downloaded 238 times
Continuing...
- Attachments
-
- mge_input_phase.xml
- MGE UPS snmp data query
- (1.51 KiB) Downloaded 231 times
-
- mge_output_phase.xml
- MGE UPS snmp data query
- (1.31 KiB) Downloaded 197 times
Who is online
Users browsing this forum: No registered users and 7 guests