Thold 0.3.4 and 1min Polling Interval

Support questions about the Threshold plugin

Moderators: Developers, Moderators

Post Reply
2bithacker
Posts: 1
Joined: Wed Jul 25, 2007 2:29 pm

Thold 0.3.4 and 1min Polling Interval

Post by 2bithacker »

Hello, I'm using Cacti 0.8.6j with the PollingIntervalv8-pia1.1 patch, running the poller on 1 minute intervals.

The values that thold is showing as current don't seem to match anything on the graphs or in the poller log for sources with 1 minute polling intervals. Sources on 5 minute intervals seem fine. I found a post about someone else having the same problem, but it was claimed to be fixed several version ago.

Seen below, Fa0/24 is on a 5 minute polling interval, and it's Current values on the graph and the thold page match. fe-0/0/0 is on a 1 minute interval, and the values that thold reports aren't even close.

Note: only the Current gprint on the graphs is in bytes per second, the others are all in bits per second. I only switched that one for comparison reasons. All graphs and the thold image were captured on the same poller run.
Attachments
cacti-thold-issue.png
cacti-thold-issue.png (71.92 KiB) Viewed 1529 times
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests