May take the SNMP information, but in device state down

[wxhh12]

May take the SNMP information, but in device equipment state is down,Other 3com all may U P


SNMP Information:

System: 3Com SuperStack 3 Switch 4500 50-Port Software Version 3Com OS V3.01.00s56
Uptime: 6965700 (0 days, 19 hours, 20 minutes)
Hostname: 4500-243
Location: Marlborough, MA 01752 USA
Contact: 3Com Corporation.



Asked was any place is wrong

[benton2006]

snmp service is up in it? snmp password error? or no MIBs file?

[wxhh12]

I have not set the password, catcai server normally, this 3com switch snmp I have opened


snmpwalk messsage


snmpwalk -v 1 -c public 192.168.X.X

SNMPv2-MIB::sysDescr.0 = STRING: 3Com SuperStack 3 Switch 4500 50-Port Software Version 3Com OS V3.01.00s56
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.43.1.16.4.3.22
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (12877900) 1 day, 11:46:19.00
SNMPv2-MIB::sysContact.0 = STRING: 3Com Corporation.
SNMPv2-MIB::sysName.0 = STRING: 4500-243
SNMPv2-MIB::sysLocation.0 = STRING: Marlborough, MA 01752 USA
SNMPv2-MIB::sysServices.0 = INTEGER: 78
IF-MIB::ifNumber.0 = INTEGER: 56
IF-MIB::ifIndex.14 = INTEGER: 14
IF-MIB::ifIndex.16 = INTEGER: 16
IF-MIB::ifIndex.31 = INTEGER: 31
IF-MIB::ifIndex.4227614 = INTEGER: 4227614
IF-MIB::ifIndex.4227626 = INTEGER: 4227626
IF-MIB::ifIndex.4227634 = INTEGER: 4227634
IF-MIB::ifIndex.4227642 = INTEGER: 4227642
IF-MIB::ifIndex.4227650 = INTEGER: 4227650


[root@sh-cacti ~]# snmpwalk -O s -v 1 192.168.X.X -c public .1.3.6.1.2.1.2
ifNumber.0 = INTEGER: 56
ifIndex.14 = INTEGER: 14
ifIndex.16 = INTEGER: 16
ifIndex.31 = INTEGER: 31
ifIndex.4227614 = INTEGER: 4227614
ifIndex.4227626 = INTEGER: 4227626
ifIndex.4227634 = INTEGER: 4227634
ifIndex.4227642 = INTEGER: 4227642
ifIndex.4227650 = INTEGER: 4227650
ifIndex.4227658 = INTEGER: 4227658
ifIndex.4227666 = INTEGER: 4227666
ifIndex.4227674 = INTEGER: 4227674
ifIndex.4227682 = INTEGER: 4227682
ifIndex.4227690 = INTEGER: 4227690

[benton2006]

cacti log information?you can set 'DEBUG' in 'setting'--'general'--'poller syslog/eventlog selection'

[benton2006]

http://forums.cacti.net/viewtopic.php?t=21029

[benton2006]

http://forums.cacti.net/viewtopic.php?t=21029

[wxhh12]

[root@cacti scripts]# tail -f /usr/local/apache/htdocs/cacti/log/cacti.log
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Assoc Failed "select id from host where disabled = '' order by id"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "replace into settings (name,value) values ('path_webroot','/usr/local/apache/htdocs/cacti')"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "truncate table poller_time"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "replace into settings (name,value) values ('date',NOW())"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Assoc Failed "select poller_id,end_time from poller_time where poller_id = 0"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Assoc Failed "select poller_output.output, poller_output.time, poller_output.local_data_id, poller_item.rrd_path, poller_item.rrd_name, poller_item.rrd_num from (poller_output,poller_item) where (poller_output.local_data_id=poller_item.local_data_id and poller_output.rrd_name=poller_item.rrd_name) "
05/24/2007 03:36:02 PM - SYSTEM STATS: Time:0.0133 Method:cmd.php Processes:1 Threads:N/A Hosts:0 HostsPerProcess:0 DataSources: RRDsProcessed:0
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "replace into settings (name,value) values ('stats_poller','Time:0.0133 Method:cmd.php Processes:1 Threads:N/A Hosts:0 HostsPerProcess:0 DataSources: RRDsProcessed:0')"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "truncate table poller_output"
05/24/2007 03:36:02 PM - CMDPHP: Poller[0] ERROR: SQL Cell Failed "select count(*) from poller_command"






snmpwalk -v 1 -c public 192.168.1.2 sysdescr


SNMPv2-MIB::sysDescr.0 = STRING: 3Com SuperStack 3 Switch 4500 50-Port Software Version 3Com OS V3.01.00s56

[benton2006]

'console'--'system utilities'--'view cacti log file'
if you set 'debug' ,there'll have many info

[fmangeant]

Hi

can you try to use the "SNMP - Reliable" Downed Host Detection method ?

(in Settings -> Poller)

[wxhh12]

I have chosen SNMP-Reliable .

I use MRTG can get the information for each port, but can only be used cacti snmp information, But deivce state dwown.

cacti can get other 3COM Swithc of information.

[wxhh12]

I change into cacti-0.8.J to cacti-0.8.6i, it's ok,.BUG? ? ? ?


Thanks help

[bayub]

Worked here when I choose from SNMP-Reliable to Ping and SNMP - Most recommended (in Settings -> Poller).

On my 3com 4500 im usin SNMP v 2c.
My cacti version is 0.8.6j


[ ]