I am using cacti-0.8.6j and have created a graph from template to monitor global http request. In this graph,Y-axis content is marked as : 100m/200m.
thanx
My cacti graph y-axis problem
Moderators: Developers, Moderators
My cacti graph y-axis problem
- Attachments
-
- data-source-template-1.gif (13.28 KiB) Viewed 1111 times
-
- data-source-template-2.gif (10 KiB) Viewed 1111 times
-
- data-source-template-4.gif (16.97 KiB) Viewed 1111 times
-
- data-source.gif (12.7 KiB) Viewed 1111 times
-
- graph.gif (10.82 KiB) Viewed 1112 times
-
gandalf
- Developer
- Posts: 22383
- Joined: Thu Dec 02, 2004 2:46 am
- Location: Muenster, Germany
- Contact:
RRDTool always reports a rate, normally based on seconds. That is, your current graphs shows 0.1 or 0.2 requests per second. Given, that you ask every 5 minutes, this makes 30-60 requests during 300 seconds.
If you prefer to make values per minute or per 5 minutes, please apply a CDEF that performs the required math
Reinhard
If you prefer to make values per minute or per 5 minutes, please apply a CDEF that performs the required math
Reinhard
thanx very much....gandalf wrote:RRDTool always reports a rate, normally based on seconds. That is, your current graphs shows 0.1 or 0.2 requests per second. Given, that you ask every 5 minutes, this makes 30-60 requests during 300 seconds.
If you prefer to make values per minute or per 5 minutes, please apply a CDEF that performs the required math
Reinhard
Who is online
Users browsing this forum: No registered users and 2 guests