empty graph on my debian sarge

[zag0r]

Hi all,

sorry if my first post is a problem, but I can't figure what kind of problem I have with my installation.

here my problem:

- all the graph (the default local set) are empty (view attached image).

My system configurations is:

- debian sarge
- php5.0.16 with snmp
- rrdtools 1.0.49
- mysql 5
- apache 2.0.56

if I run the command php5 cmd.php the output is:

Code: Select all

->refused09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] PING: Host is alive
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] SNMP: SNMP not performed due to setting or ping result.
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[3] CMD: perl /var/www/cacti-0.8.6h/scripts/linux_memory.pl MemFree:, output: 108092
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[4] CMD: perl /var/www/cacti-0.8.6h/scripts/linux_memory.pl SwapFree:, output: 1510068
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[5] CMD: perl /var/www/cacti-0.8.6h/scripts/loadavg_multi.pl, output: 1min:0.00 5min:0.00 10min:0.00
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[6] CMD: perl /var/www/cacti-0.8.6h/scripts/unix_users.pl , output: 1
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[7] CMD: perl /var/www/cacti-0.8.6h/scripts/unix_processes.pl, output: 98
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[10] CMD: perl /var/www/cacti-0.8.6h/scripts/query_unix_partitions.pl  get available /dev/hda1, output: 109581368
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Host[1] DS[10] CMD: perl /var/www/cacti-0.8.6h/scripts/query_unix_partitions.pl  get used /dev/hda1, output: 1707404
09/12/2006 11:33:32 AM - CMDPHP: Poller[0] Time: 0.1495 s, Theads: N/A, Hosts: 1

and php5 poller.php the result is

Code: Select all

Waiting on 1/1 pollers.
Waiting on 1/1 pollers.
Waiting on 1/1 pollers.

the content of the folder rra is

Code: Select all

-rw-r--r--  1 root root  94660 2006-09-12 11:33 galactica_hdd_free_10.rrd
-rw-r--r--  1 root root 141484 2006-09-12 11:33 localhost_load_1min_5.rrd
-rw-r--r--  1 root root  47836 2006-09-12 11:33 localhost_mem_buffers_3.rrd
-rw-r--r--  1 root root  47836 2006-09-12 11:33 localhost_mem_swap_4.rrd
-rw-r--r--  1 root root  47836 2006-09-12 11:33 localhost_proc_7.rrd
-rw-r--r--  1 root root  47836 2006-09-12 11:33 localhost_users_6.rrd

Any idea or suggestion?

With best regards, zag0r

[gandalf]

Please report, which Host Template was applied to host "galactica". Suppose, it was "local Linux Machine". Please change to "generic SNMP Host" or the like. And you'll have to specify valid SNMP community strings for remote hosts (as long as you try to get data via SNMP, which is commonly the case). You may read fmangeants nice HowTo on SNMP setup, see http://forums.cacti.net/viewtopic.php?t=15353
Reinhard