scripts for monitoring Nortel MLT's and TDI's ?

ruud · Post by **ruud** » Tue Aug 29, 2006 2:15 pm

Anyone here got any luck in monitoring MLT and TDI stats on a nortel p8600 device ???

mikefrank1098 · Post by **mikefrank1098** » Thu Aug 31, 2006 3:35 am

Hi all,

I made a query script for Nortel MLT monitoring. Would be nice if somebody could test and tell me the results.
From my point if view it works.

regards

Mike

moe_szyslak · Post by **moe_szyslak** » Fri Aug 17, 2007 6:53 am

Hi mikefrank1098,

I implemented the query and I got an empty (=0) results. By checking SNMP with a snmpwalk I found out, that I doesn't have the OID .1.3.6.1.4.1.2272.1.12.6.1.1.6 or .1.3.6.1.4.1.2272.1.12.6.1.1.10.

Greetings
Moe

[/img]

mikefrank1098 · Post by **mikefrank1098** » Mon Aug 20, 2007 1:44 am

What type of Hardware and what image do you have?

moe_szyslak · Post by **moe_szyslak** » Tue Aug 21, 2007 12:04 am

It's a Passport 8606 with Image 3.3.0.0

mikefrank1098 · Post by **mikefrank1098** » Tue Aug 21, 2007 1:17 am

I tested this with passport 8610 SW 3.7, Baystack 450 4.2 and Baystack 470 3.0 The rapidCity tree (.1.3.6.1.4.1.2272) is old implemented.
Could you walk the tree back with snmpwalk to see from which OID you receive data. I assume that the standard RFC tree is working.

moe_szyslak · Post by **moe_szyslak** » Tue Aug 21, 2007 4:01 am

Yes the tree is implemented but the named OIDs are missing and there're no 64bit counters.

kjrichardson · Post by **kjrichardson** » Wed Sep 23, 2009 10:27 am

I have tested this with a 5510, 4524gt, 2550t and it works. my 8610 wont poll the MLT's though, I can find in the OID the broadcast and multicast packets, but it isnt passing the OID through snmp with the unicast packets.... passport 8610 with code level 4.1.1.1... anyone have it work with an 8610? maybe I need to purchase the upgrade to the code?

Cacti