Gaphs sorta working

[shawnbot]

I've serch the forums and could not find an answer to my problem...several promising leads but nothing that has resolved the issue. Let's begin...

I setup Cacti on a FreeBSD 6.0 box from the ports, Cacti version is 0.8.6h_43. I got everything up and working with 30 minutes, including graphing my first Cisco switch without any problems. I let it run for a few days while I was busy. Graphing worked perfectly. Then I added several other devices, some the same as the first switch, others different such as routers. Either way, no devices added after the first one showed any interface info but the CPU usage graph works for all. Here is a snippet form the cacti.log:

08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/svf_st_albert_to_ab_oats_mu_traffic_in_109.rrd --template traffic_in:traffic_out 1155680101:4247264530:996794094
08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/legal_to_clyde_mu_traffic_in_110.rrd --template traffic_in:traffic_out 1155680101:1694658346:2577244781
08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/legal_to_clyde_mu_traffic_in_111.rrd --template traffic_out:traffic_in 1155680101:2577244879:1694660760
08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/legal_to_clyde_mu_mu_rssi_112.rrd --template muismRxThreshold:mu_uniirxthr:mu_rssi 1155680101:-90:-90:-80
08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/legal_to_clyde_mu_traffic_in_113.rrd --template traffic_out:traffic_in 1155680101:1693203351:2575793993
08/15/2006 04:15:05 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/legal_to_clyde_mu_traffic_in_114.rrd --template traffic_in:traffic_out 1155680101:2575793993:1693204845
08/15/2006 04:15:05 PM - SYSTEM STATS: Time:4.7782 Method:cmd.php Processes:1 Threads:N/A Hosts:18 HostsPerProcess:18 DataSources:212 RRDsProcessed:112
08/15/2006 04:15:05 PM - CMDPHP: Poller[0] DEBUG: SQL Exec: "replace into settings (name,value) values ('stats_poller','Time:4.7782 Method:cmd.php Processes:1 Threads:N/A Hosts:18 HostsPerProcess:18 DataSources:212 RRDsProcessed:112')"
08/15/2006 04:15:05 PM - CMDPHP: Poller[0] DEBUG: SQL Exec: "truncate table poller_output"
08/15/2006 04:15:05 PM - CMDPHP: Poller[0] DEBUG: SQL Cell: "select count(*) from poller_command"

The devices shown in the log were added after the original cisco switch and are setup correctly. I'm also attaching screen shots of the device that works properly and one that doesn't. Any help would be appreciated.

[bmcghee]

little hint, the ip u blocked out at the top. is at the bottom left

[gandalf]

For NaN debugging please have a read at http://forums.cacti.net/viewtopic.php?t=15136
Reinhard

[shawnbot]

Missed the IP at the bottom. Doh!