Graph Templates with visual Limit per Bandwith

[silv]

Is it possible to limit the "Interface - Traffic" Graphs to an colored Value or something like that ?

We monitor lot of Interfaces with different Linespeeds and i would like it so see on "the first view" if the Bandwith Usage reaches the max possible of the Interface

I need something to define the Maxspeed per Interface and get this plotted into the Graph.

any hints are welcome

thanks,
silv

[BSOD2600]

Modify the graph template and add a hline where you specifiy the max value you want.

[gandalf]

You may want to have a look at http://forums.cacti.net/viewtopic.php?t ... tilization
Reinhard

[Dinfree]

hi,

I wish ask you a question about bandwidth.

what's the "query_ifSpeed" variable used to graph template (with HRULES for example) ??

For me this is a parameter which represent the speed of synchronization
between a router and the modem of WAN line and not the bandwith exactly.

Is it right or wrong ?
Is it possible to obtain a list with differents values of the MIB (for example : "query_ifSpeed")?
How to obtain it ?

Thanks in advance

[gandalf]

Try

Code: Select all

 snmpwalk -c <community> -v 1 <hostname> interfaces|more
IF-MIB::ifNumber.0 = INTEGER: 6
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifIndex.5 = INTEGER: 5
IF-MIB::ifIndex.6 = INTEGER: 6
....
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 10000000
IF-MIB::ifSpeed.3 = Gauge32: 1000000000
IF-MIB::ifSpeed.4 = Gauge32: 1000000000
IF-MIB::ifSpeed.5 = Gauge32: 4000000
IF-MIB::ifSpeed.6 = Gauge32: 0

To see ifSpeed. Cacti will store that value on each re-indexing event. It is available as |query_ifSpeed|
Reinhard