Cisco Call Manager - Phones
Moderators: Developers, Moderators
- Instigater
- Cacti User
- Posts: 141
- Joined: Mon Dec 13, 2004 5:14 pm
- Location: Jurmala, Latvia
Cisco Call Manager - Phones
Cisco Call Manager gives draft statistics through SNMP so I made simple graph that shows Registered, Unregistered and Rejected Phones.
NB! Template is for 1 minute polling interval. Adjustment must be made to run on default Cacti setup.
NB! Template is for 1 minute polling interval. Adjustment must be made to run on default Cacti setup.
- Attachments
-
- cacti_graph_template_cisco_call_manager_phones.xml
- (10.66 KiB) Downloaded 3448 times
-
- cacti_host_template_cisco_call_manager.xml
- (302 Bytes) Downloaded 3747 times
Last edited by Instigater on Mon Jun 19, 2006 7:28 am, edited 2 times in total.
- Instigater
- Cacti User
- Posts: 141
- Joined: Mon Dec 13, 2004 5:14 pm
- Location: Jurmala, Latvia
...
- Attachments
-
- cacti_data_template_cisco_call_manager_registered_phones.xml
- (2.33 KiB) Downloaded 2776 times
-
- cacti_data_template_cisco_call_manager_rejected_phones.xml
- (2.33 KiB) Downloaded 2600 times
-
- cacti_data_template_cisco_call_manager_unregistered_phones.xml
- (2.33 KiB) Downloaded 2828 times
How can i fix this
When importing I get the following errors;
[success] Cisco Call Manager - Phones [update]
+ Unmet Dependency: (Data Template Item) ccm_regphones
+ Unmet Dependency: (GPRINT Preset) Normal
+ Unmet Dependency: (GPRINT Preset) Exact Numbers
+ Unmet Dependency: (Data Template Item) ccm_unregphones
+ Unmet Dependency: (Data Template Item) ccm_rejectphones
+ Unmet Dependency: (CDEF) Total All Data Sources
[success] Cisco Call Manager - Registered Phones [update]
+ Unmet Dependency: (Data Input Method) Get SNMP Data
+ Unmet Dependency: (Data Input Field) OID
+ Unmet Dependency: (Data Input Field) SNMP Version (1, 2, or 3)
+ Unmet Dependency: (Data Input Field) SNMP Password
+ Unmet Dependency: (Data Input Field) SNMP Username
+ Unmet Dependency: (Data Input Field) SNMP Community
+ Unmet Dependency: (Data Input Field) SNMP IP Address
[success] Cisco Call Manager - Phones [update]
+ Unmet Dependency: (Data Template Item) ccm_regphones
+ Unmet Dependency: (GPRINT Preset) Normal
+ Unmet Dependency: (GPRINT Preset) Exact Numbers
+ Unmet Dependency: (Data Template Item) ccm_unregphones
+ Unmet Dependency: (Data Template Item) ccm_rejectphones
+ Unmet Dependency: (CDEF) Total All Data Sources
[success] Cisco Call Manager - Registered Phones [update]
+ Unmet Dependency: (Data Input Method) Get SNMP Data
+ Unmet Dependency: (Data Input Field) OID
+ Unmet Dependency: (Data Input Field) SNMP Version (1, 2, or 3)
+ Unmet Dependency: (Data Input Field) SNMP Password
+ Unmet Dependency: (Data Input Field) SNMP Username
+ Unmet Dependency: (Data Input Field) SNMP Community
+ Unmet Dependency: (Data Input Field) SNMP IP Address
- Instigater
- Cacti User
- Posts: 141
- Joined: Mon Dec 13, 2004 5:14 pm
- Location: Jurmala, Latvia
:(
I am a total newb, and just want to see how the CCM graphs work...can anyone explain what he means? perhaps a step by step. I have teh templates imported and created teh graph but it never makes it, red X still.
debug mode show:
ERROR: can't parse '#00CF00:Registered Phones'
debug mode show:
ERROR: can't parse '#00CF00:Registered Phones'
- Instigater
- Cacti User
- Posts: 141
- Joined: Mon Dec 13, 2004 5:14 pm
- Location: Jurmala, Latvia
Can we get some more details...such a good script in theory but no support. After donig what you said to do, from what I can understand you writing....i get the following on the Graph now,
ERROR: can't parse ':LAST: Current\:'
can you take some screenshots of your data templates and graph templates please....It would be nice to use this.
ERROR: can't parse ':LAST: Current\:'
can you take some screenshots of your data templates and graph templates please....It would be nice to use this.
Hi everybody...
I am really interresting in monitor some parameteres of Cisco Call Manager Servers...
I have seen that there is no updated information about this...
I Have used the templates posted...
First I IMPORT : Data Templates (reg, inreg and rejec)
then I edited each data template added by modifying the follow:
*Data Input Method --> Get SNMP Data
*Asociated RRA --> Daily, Weekly, Monthly, Yearly (Hourly no yet because I have not added the 1 minute Poll Patch... )
*Step --> 300
all the fields are set by the template imported...
Then I IMPORTED Graph Template "Cisco Call Manager - Phones " and edited:
Graph Template Items [edit: Cisco Call Manager - Phones]
In Each
FROM: Item # 1 (No Task): Registered Phones
TO: Item # 1 (ccm_regphones): Registered Phones
It has benn do it changing the follow:
*Data Source [Field Not Templated]
The data source to use for this graph item. --> Cisco Call Manager - REgistered.. Unregi... or Rejected
*CDEF Function
A CDEF (math) function to apply to this item on the graph. --> Total All Data Source
I did it for every Item # and taking care about denomination: REgis, UNRE, or REJEc ...
At last save what i have done and IMPORTED: HOST TEMPLATE Cisco Call Manager
IN "Associated Graph Templates" I added Graph Template: --> 1) Cisco Call Manager - Phones
at this point everything should be working... BUT NOT!
someone can add some information... adn help everybody..
help will apreciated...!!
WALTER MUNGUIA
I am really interresting in monitor some parameteres of Cisco Call Manager Servers...
I have seen that there is no updated information about this...
I Have used the templates posted...
First I IMPORT : Data Templates (reg, inreg and rejec)
then I edited each data template added by modifying the follow:
*Data Input Method --> Get SNMP Data
*Asociated RRA --> Daily, Weekly, Monthly, Yearly (Hourly no yet because I have not added the 1 minute Poll Patch... )
*Step --> 300
all the fields are set by the template imported...
Then I IMPORTED Graph Template "Cisco Call Manager - Phones " and edited:
Graph Template Items [edit: Cisco Call Manager - Phones]
In Each
FROM: Item # 1 (No Task): Registered Phones
TO: Item # 1 (ccm_regphones): Registered Phones
It has benn do it changing the follow:
*Data Source [Field Not Templated]
The data source to use for this graph item. --> Cisco Call Manager - REgistered.. Unregi... or Rejected
*CDEF Function
A CDEF (math) function to apply to this item on the graph. --> Total All Data Source
I did it for every Item # and taking care about denomination: REgis, UNRE, or REJEc ...
At last save what i have done and IMPORTED: HOST TEMPLATE Cisco Call Manager
IN "Associated Graph Templates" I added Graph Template: --> 1) Cisco Call Manager - Phones
at this point everything should be working... BUT NOT!
someone can add some information... adn help everybody..
help will apreciated...!!
WALTER MUNGUIA
this is my Log File:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[625] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[626] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[624] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[622] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[621] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[620] WARNING: Result from SNMP not valid. Partial Result:
and this is Data source debug for Registered phones:
Data Source Debug
/usr/bin/rrdtool create \
/var/www/cacti/rra/callmanager_publisher_ccm_regphones_624.rrd \
--step 300 \
DS:ccm_regphones:GAUGE:600:0:10000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MIN:0.5:1:600 \
RRA:MIN:0.5:6:700 \
RRA:MIN:0.5:24:775 \
RRA:MIN:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \
RRA:LAST:0.5:1:600 \
RRA:LAST:0.5:6:700 \
RRA:LAST:0.5:24:775 \
RRA:LAST:0.5:288:797 \
And this it the architecture:
Thanks for help!
and sorry for the language!!!
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[625] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[626] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[146] DS[624] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[622] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[621] WARNING: Result from SNMP not valid. Partial Result:
02/15/2007 08:46:09 AM - CMDPHP: Poller[0] Host[145] DS[620] WARNING: Result from SNMP not valid. Partial Result:
and this is Data source debug for Registered phones:
Data Source Debug
/usr/bin/rrdtool create \
/var/www/cacti/rra/callmanager_publisher_ccm_regphones_624.rrd \
--step 300 \
DS:ccm_regphones:GAUGE:600:0:10000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MIN:0.5:1:600 \
RRA:MIN:0.5:6:700 \
RRA:MIN:0.5:24:775 \
RRA:MIN:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \
RRA:LAST:0.5:1:600 \
RRA:LAST:0.5:6:700 \
RRA:LAST:0.5:24:775 \
RRA:LAST:0.5:288:797 \
And this it the architecture:
Cacti Version - 0.8.6j
Plugin Architecture - 1.1
Poller Type - CMD.php
Server Info - Linux 2.6.17-10-server
Web Server - Apache/2.0.55 (Ubuntu) PHP/5.1.6 mod_ssl/2.0.55 OpenSSL/0.9.8b
PHP - 5.1.6
PHP Extensions - xmlwriter, libxml, xml, wddx, tokenizer, sysvshm, sysvsem, sysvmsg, standard, SimpleXML, sockets, soap, SPL, shmop, session, Reflection, posix, mime_magic, mbstring, iconv, hash, gettext, ftp, filepro, exif, dom, dba, date, ctype, calendar, bz2, bcmath, zlib, pcre, openssl, xmlreader, apache2handler, curl, gd, imap, ldap, mcrypt, mhash, pspell, snmp, SQLite, xmlrpc, xsl, mysql, mysqli
MySQL - 5.0.24a-Debian_9-log
RRDTool - 1.2.11
SNMP - 5.2.2
Plugins
- Host Info (hostinfo - v0.1)
Update Checker (update - v0.3)
Network Discovery (discovery - v0.7)
FlowView (flowview - v0.3)
Syslog Monitoring (haloe - v0.4)
Device Monitoring (monitor - v0.7)
NTop Viewer (ntop - v0.1)
Thresholds (thold - v0.3.1)
Network Tools (tools - v0.2)
Simple Links page (links - v0.3)
PHP Network Weathermap (weathermap - v0.82)
ipsubnet - v0.4b
PHP Network Managing (manage - v0.4)
Configuration manager (configmanager - v0.5f)
Thanks for help!
and sorry for the language!!!
-
- Posts: 23
- Joined: Thu Jun 15, 2006 7:03 am
- Location: Paris, France
-
- Posts: 45
- Joined: Wed Dec 06, 2006 12:02 am
- Location: Perth , Australia
Here is my template for monitoring Registered and Unregistered phones in CCM. I have had these running successfully for serveral months now..
- Attachments
-
- cacti_graph_template_ccm_phones.xml
- (13.98 KiB) Downloaded 2485 times
Who is online
Users browsing this forum: No registered users and 0 guests