Fix 64bit counters in Interface Traffic graphs
Moderators: Developers, Moderators
Re: Fix 64bit counters in Interface Traffic graphs
I am having a problem with this plugin. Everything works, but it doesn't flip the counters to 64bit; it still uses the 32bit counters.
I have the data schema for cacti, and I copied the update in the fix64bit_poller_bottom to write out to the cacti log file. Here is the update:
UPDATE data_input_data, data_template_data SET data_input_data.value='13' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=15041
What does the data_input_data.value refer to? Which table does this cross reference too? I think this must be wrong; maybe a duplicate or something? Any help appreciated.
I have the data schema for cacti, and I copied the update in the fix64bit_poller_bottom to write out to the cacti log file. Here is the update:
UPDATE data_input_data, data_template_data SET data_input_data.value='13' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=15041
What does the data_input_data.value refer to? Which table does this cross reference too? I think this must be wrong; maybe a duplicate or something? Any help appreciated.
Re: Fix 64bit counters in Interface Traffic graphs
Make sure that you have set the right values in plugin Settings -> Misc of Cacti. data_input_data.value 13 is a data query for 32-bit graphs on a default Cacti installation, 64-bit is 14.amunro wrote:Everything works, but it doesn't flip the counters to 64bit; it still uses the 32bit counters.
UPDATE data_input_data, data_template_data SET data_input_data.value='13' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=15041
Settings should look like that (I suspect that you have In/Out Bits (64-bit Counters) in SNMP Query to Search and In/Out Bits in Desired SNMP Query field):
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
--- 0.4 ---
Updated graphs spiking fix (thanks, mitchese!)
update_poller_cache fix for Cacti 8.8.a (thanks, mitchese!)
Updated graphs spiking fix (thanks, mitchese!)
update_poller_cache fix for Cacti 8.8.a (thanks, mitchese!)
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
I checked the settings page. I was flicking it back and forth between 32 and 64bit counters. I flicked it back to 32->64, and I still don't get 64bit counters. Logging:
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Found file /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing lonsjbs01agw.6794.traffic_in
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd:traffic_in
03/11/2014 09:05:14 AM - CMDPHP: Poller[0] UPDATE data_input_data, data_template_data SET data_input_data.value='14' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=6794
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing lonsjbs01agw.6794.traffic_out
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd:traffic_out
03/11/2014 09:05:14 AM - CMDPHP: Poller[0] UPDATE data_input_data, data_template_data SET data_input_data.value='14' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=6794
If I run spine in debug after the logging above:
03/11/2014 09:11:56 AM - SPINE: Poller[0] Host[261] TH[1] DS[6794] SNMP: v2: lonsjbs01agw.hosting.travel.lcl, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.6, value: 2410536635
03/11/2014 09:11:56 AM - SPINE: Poller[0] Host[261] TH[1] DS[6794] SNMP: v2: lonsjbs01agw.hosting.travel.lcl, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.6, value: 239938575
oids/counters are still 32bit.
I will upgrade to your version 0.4.
I also tried this on my ubuntu at home last night running 0.8.8a cacti (everything installed from apt-get repositories). Same. Not setting the counters to 64bit. Am I doing something really stupid?
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Found file /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing lonsjbs01agw.6794.traffic_in
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd:traffic_in
03/11/2014 09:05:14 AM - CMDPHP: Poller[0] UPDATE data_input_data, data_template_data SET data_input_data.value='14' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=6794
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing lonsjbs01agw.6794.traffic_out
03/11/2014 09:05:14 AM - FIX64BIT: Poller[0] Fixing /var/www/html/cacti/rra/lonstct01agw_traffic_in_6794.rrd:traffic_out
03/11/2014 09:05:14 AM - CMDPHP: Poller[0] UPDATE data_input_data, data_template_data SET data_input_data.value='14' WHERE data_input_data.data_template_data_id=data_template_data.id AND data_input_data.data_input_field_id=14 AND data_template_data.local_data_id=6794
If I run spine in debug after the logging above:
03/11/2014 09:11:56 AM - SPINE: Poller[0] Host[261] TH[1] DS[6794] SNMP: v2: lonsjbs01agw.hosting.travel.lcl, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.6, value: 2410536635
03/11/2014 09:11:56 AM - SPINE: Poller[0] Host[261] TH[1] DS[6794] SNMP: v2: lonsjbs01agw.hosting.travel.lcl, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.6, value: 239938575
oids/counters are still 32bit.
I will upgrade to your version 0.4.
I also tried this on my ubuntu at home last night running 0.8.8a cacti (everything installed from apt-get repositories). Same. Not setting the counters to 64bit. Am I doing something really stupid?
Re: Fix 64bit counters in Interface Traffic graphs
Here is one where I selected the 64bit counters manually:
03/11/2014 09:21:38 AM - SPINE: Poller[0] Host[245] TH[1] DS[20524] SNMP: v2: lonsjbs01bgw.hosting.travel.lcl, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.6, value: 129580459039901
03/11/2014 09:21:38 AM - SPINE: Poller[0] Host[245] TH[1] DS[20524] SNMP: v2: lonsjbs01bgw.hosting.travel.lcl, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.6, value: 51329626988908
snmpget -c public -v 2c lonsjbs01bgw .1.3.6.1.2.1.31.1.1.1.6.6
IF-MIB::ifHCInOctets.6 = Counter64: 51329829999984
Thus I should be seeing very large number and an oid similiar to above. I will upgrade to the new plugin.
03/11/2014 09:21:38 AM - SPINE: Poller[0] Host[245] TH[1] DS[20524] SNMP: v2: lonsjbs01bgw.hosting.travel.lcl, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.6, value: 129580459039901
03/11/2014 09:21:38 AM - SPINE: Poller[0] Host[245] TH[1] DS[20524] SNMP: v2: lonsjbs01bgw.hosting.travel.lcl, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.6, value: 51329626988908
snmpget -c public -v 2c lonsjbs01bgw .1.3.6.1.2.1.31.1.1.1.6.6
IF-MIB::ifHCInOctets.6 = Counter64: 51329829999984
Thus I should be seeing very large number and an oid similiar to above. I will upgrade to the new plugin.
Re: Fix 64bit counters in Interface Traffic graphs
Try upgrading plugin, then show me screenshots of Settings -> Misc part of a fix64bit, screenshot of data_sources.php?action=ds_edit&id=6794amunro wrote:Thus I should be seeing very large number and an oid similiar to above. I will upgrade to the new plugin.
Also, if you are not upgrading plugin, try utilities.php?action=clear_poller_cache
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
Since I installed the 0.4 plugin, its working perfectly! This is cacti 0.8.8b.
Re: Fix 64bit counters in Interface Traffic graphs
Great! So it was a update_poller_cache problem. What's funny, problem was pointed out and fixed by mitchese last summer, but the solution was written on a plugin wiki page, where I do not have notifications. Saw that by occasion.amunro wrote:Since I installed the 0.4 plugin, its working perfectly! This is cacti 0.8.8b.
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
I just updated the plugin on my Ubuntu laptop at home and its working there too. Thanks for fixing it
Re: Fix 64bit counters in Interface Traffic graphs
Hey Guys,
Quick question about this plugin. Im using Spine to poll my graphs, but when I activate this option on a graph it switched back to CMD only for the graph I told to use the 64bit counter fix ..is there a way to force this plugin to use spine ?
any help would be amazing !
Cacti 0.8.8.b
Plugin Version 0.4
Quick question about this plugin. Im using Spine to poll my graphs, but when I activate this option on a graph it switched back to CMD only for the graph I told to use the 64bit counter fix ..is there a way to force this plugin to use spine ?
any help would be amazing !
Cacti 0.8.8.b
Plugin Version 0.4
Re: Fix 64bit counters in Interface Traffic graphs
Fix64bit works with Spine, there is no difference with using cmd or spine. You should check plugin settings in Settings/Misc of Cacti. Look at the screenshot at the beginning of this thread.coxxy wrote:Hey Guys,
Quick question about this plugin. Im using Spine to poll my graphs, but when I activate this option on a graph it switched back to CMD only for the graph I told to use the 64bit counter fix ..is there a way to force this plugin to use spine ?
any help would be amazing !
Cacti 0.8.8.b
Plugin Version 0.4
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
Thank you for replying so quick,shd wrote:Fix64bit works with Spine, there is no difference with using cmd or spine. You should check plugin settings in Settings/Misc of Cacti. Look at the screenshot at the beginning of this thread.coxxy wrote:Hey Guys,
Quick question about this plugin. Im using Spine to poll my graphs, but when I activate this option on a graph it switched back to CMD only for the graph I told to use the 64bit counter fix ..is there a way to force this plugin to use spine ?
any help would be amazing !
Cacti 0.8.8.b
Plugin Version 0.4
03/23/2015 02:24:59 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'X.X.X.3', and OID:'.1.3.6.1.2.1.31.1.1.1.10.51'
This is what i get after i change the Graph to 64bit.
I have checked the settings and looks the same as the picture.
Re: Fix 64bit counters in Interface Traffic graphs
What is the model of polled device? Looks like problem with either your SNMP version is less than 2 or polled device doesn't support ifHCOutOctets.coxxy wrote:Thank you for replying so quick,
03/23/2015 02:24:59 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'X.X.X.3', and OID:'.1.3.6.1.2.1.31.1.1.1.10.51'
This is what i get after i change the Graph to 64bit.
I have checked the settings and looks the same as the picture.
Fix64bit only changes oid numbers to poll and the rrd file values limits. Nothing more. Try to create 64-bit graphs manually, does it have the same behavior?
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Re: Fix 64bit counters in Interface Traffic graphs
shd wrote:What is the model of polled device? Looks like problem with either your SNMP version is less than 2 or polled device doesn't support ifHCOutOctets.coxxy wrote:Thank you for replying so quick,
03/23/2015 02:24:59 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'X.X.X.3', and OID:'.1.3.6.1.2.1.31.1.1.1.10.51'
This is what i get after i change the Graph to 64bit.
I have checked the settings and looks the same as the picture.
Fix64bit only changes oid numbers to poll and the rrd file values limits. Nothing more. Try to create 64-bit graphs manually, does it have the same behavior?
I tried to make a 64bit graph with the same results, Im using a Dell Power edge server R220 running server 2012 with a 10 Gig Broadcomm NIC with a 3 Gbps Fiber connection
when it goes over 1Gbps the graph starts over so 1.2Gbps shows as 200Mbps
as far as i can tell its snmp v2
Re: Fix 64bit counters in Interface Traffic graphs
Fix64bit was intended to overcome problems with 32bit counters overflowing near 100Mbps. 1.2Gbps is something else. First of all, check RRD Maximum for you 64 bit graphs, set it to something more than 10^10. Then add some more zeroes at the end just to be sure.coxxy wrote:I tried to make a 64bit graph with the same results, Im using a Dell Power edge server R220 running server 2012 with a 10 Gig Broadcomm NIC with a 3 Gbps Fiber connection
when it goes over 1Gbps the graph starts over so 1.2Gbps shows as 200Mbps
as far as i can tell its snmp v2
As for timeouts, if the results are same, it could be something else. Try running spine in debug mode (-V=5 for verbosity, -R for read only, -H=yourhostid). see what will it say. Try also running tcpdump -vvv host youhostip for looking into other side.
CentOS 64-bit, 20Gb RAM, 8xCPU, some virtual datastore. 600+ hosts, 200k+ datasources, avg polltime 45 sec
Who is online
Users browsing this forum: No registered users and 0 guests