Hi,
_Total isn't working because oid_index_parse isn't including it. Here is what I'm currently using to also include _Total:
<oid_index_parse>OID/REGEXP:.*((2\.[0-9]{1,2}\.58)|(6\.95\.84\.111\.116\.97\.108))$</oid_index_parse>
This makes a lot of assumptions about the OID (basically a known length). I had to modify that even more to get Physical disk statistics to include everything properly. In fact with some minor modifications it would probably work for anything similar based around SNMP Informant (standard or advanced).
<oid_index_parse>OID/REGEXP:.*\.61\.1\.1\.(.*)$</oid_index_parse>
- Robbie
- Duke University
Windows 2000 / 2k3 Disk Statistics
Moderators: Developers, Moderators
Pls advise
What's the next step to alter this ?
I think the above post is related to mine but I'm not sure how to configure it ? Pl advice , thanks
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentFreeSpace, oid: .1.3.6.1.4.1.9600.1.1.1.1.5.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: AvgDiskReadQueueLen, oid: .1.3.6.1.4.1.9600.1.1.1.1.8.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentDiskWriteTim, oid: .1.3.6.1.4.1.9600.1.1.1.1.4.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentDiskReadTime, oid: .1.3.6.1.4.1.9600.1.1.1.1.2.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: FreeMegabytes, oid: .1.3.6.1.4.1.9600.1.1.1.1.20.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: AvgDiskWritePerSec, oid: .1.3.6.1.4.1.9600.1.1.1.1.19.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
I think the above post is related to mine but I'm not sure how to configure it ? Pl advice , thanks
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentFreeSpace, oid: .1.3.6.1.4.1.9600.1.1.1.1.5.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: AvgDiskReadQueueLen, oid: .1.3.6.1.4.1.9600.1.1.1.1.8.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentDiskWriteTim, oid: .1.3.6.1.4.1.9600.1.1.1.1.4.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: PercentDiskReadTime, oid: .1.3.6.1.4.1.9600.1.1.1.1.2.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: FreeMegabytes, oid: .1.3.6.1.4.1.9600.1.1.1.1.20.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] SNMP: v1: localhost, dsname: AvgDiskWritePerSec, oid: .1.3.6.1.4.1.9600.1.1.1.1.19.1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108, output: U
08/28/2006 05:50:05 AM - CMDPHP: Poller[0] Host[2] DS[154] WARNING: Result from SNMP not valid. Partial Result:
Edit the snmp_informant_disk.xml file (your data source) and where this line is:
<oid_index_parse>OID/REGEXP:.*(2\.[0-9]{1,2}\.58)$</oid_index_parse>
you need to change it to be this:
<oid_index_parse>OID/REGEXP:.*\.1\.1\.1\.(.*)$</oid_index_parse>
otherwise _Total will never work. I don't know if thats the source of your errors or not, but without that change, _Total will be broken.
- Robbie
<oid_index_parse>OID/REGEXP:.*(2\.[0-9]{1,2}\.58)$</oid_index_parse>
you need to change it to be this:
<oid_index_parse>OID/REGEXP:.*\.1\.1\.1\.(.*)$</oid_index_parse>
otherwise _Total will never work. I don't know if thats the source of your errors or not, but without that change, _Total will be broken.
- Robbie
-
AndyStewart
- Cacti User
- Posts: 102
- Joined: Thu Sep 29, 2005 5:21 am
- Location: Edinburgh, Scotland
Just installed this on one of our SAN servers (normal disk stats were only showing 200GB on the graphs - 2^32 limit or something)
but i'm getting the following error - can anyone help?
but i'm getting the following error - can anyone help?
RRDTool Command:
c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="SAN - NETEHNAS01 - Disk - E:" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="Unit" \
--slope-mode \
DEF:a="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":PercentDiskWriteTim:LAST \
DEF:b="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":PercentDiskReadTime:LAST \
DEF:c="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":AvgDiskReadQueueLen:LAST \
DEF:d="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":AvgDiskWriteQueueLe:LAST \
DEF:e="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":PercentFreeSpace:LAST \
DEF:f="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":PercentDiskReadTime:LAST \
DEF:g="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":PercentFreeSpace:LAST \
DEF:h="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":FreeMegabytes:LAST \
DEF:i="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":AvgDiskReadPerSec:LAST \
DEF:j="E\:/Inetpub/wwwroot/cacti/rra/san_netehnas01_freemegabytes_1617.rrd":AvgDiskWritePerSec:LAST \
CDEF:cdefbc=h,1024,/ \
CDEF:cdefdc=a,0,*,100,+ \
AREA:a#2175D9:"Write Time(%)" \
AREA:f#8D85F3:"Read Time(%)" \
LINE1:c#FF0000:"Read Queue\:" \
LINE1:d#00FF00:"Write Queue\:" \
LINE2:g#000000:"" \
LINE1:f#000000:"" \
LINE1:g#FF5F00:"Free Space (%)\n" \
COMMENT:"Statistics" \
GPRINT:f:LAST:" Read\: (%1.1lf %%)" \
GPRINTLAST:"Write\: (%1.1lf %%)" \
GPRINT:g:LAST:"Free\: (%1.1lf %%)" \
LINE1:h:"Available\:" \
GPRINT:cdefbc:LAST:" Available\: %5.2lf Gb\n" \
COMMENT:"Read IO / sec\:" \
LINE1:i:"Read /s\:\n" \
GPRINT:i:LAST:" Current\:%8.0lf" \
GPRINT:i:AVERAGE:"Average\:%8.0lf" \
GPRINT:i:MAX:"Maximum\:%8.0lf\n" \
COMMENT:"Write IO / sec\:" \
LINE1:j:"Write /s" \
GPRINT:j:LAST:" Current\:%8.0lf" \
GPRINT:j:AVERAGE:"Average\:%8.0lf" \
GPRINT:j:MAX:"Maximum\:%8.0lf\n" \
LINE1::"Free Space (Mb)" \
COMMENT:"Read Queue\:" \
GPRINT:c:LAST:" Current\:%8.0lf" \
GPRINT:c:AVERAGE:"Average\:%8.0lf" \
GPRINT:c:MAX:"Maximum\:%8.0lf\n" \
COMMENT:"Write Queue\:" \
GPRINT:d:LAST:" Current\:%8.0lf" \
GPRINT:d:AVERAGE:"Average\:%8.0lf" \
GPRINT:d:MAX:"Maximum\:%8.0lf\n" \
LINE1:cdefdc#FFFFFF:""
RRDTool Says:
ERROR: Legend set but no color: Available\:
I don't care if the glass is half full or half empty, i want to know, who's been drinking my pint!!!
[size=75][Windows 2003 & IIS6] [Cacti 0.8.7b] [ActivePerl 5.8.8.817] [MySql 5.0.19] [NetSNMP 5.2.1.2-1] [PHP 5.1.2] [RRDTool 1.2.11]
[Plugins: PluginArchitecture, Monitor, Discovery, Threshold, Update, Reports, Manage, RealTime][/size]
[size=75][Windows 2003 & IIS6] [Cacti 0.8.7b] [ActivePerl 5.8.8.817] [MySql 5.0.19] [NetSNMP 5.2.1.2-1] [PHP 5.1.2] [RRDTool 1.2.11]
[Plugins: PluginArchitecture, Monitor, Discovery, Threshold, Update, Reports, Manage, RealTime][/size]
Hi,
I followed the instructions. I got this in the verbose snmp querie :
So, it seems OK; but in the cacti logs, I got that :
The DS 38 is "Disk Stats - _Total "
I tried the "<oid_index_parse>" change in the xml file, without success :
The C, D and _Total didn't work at all
Thanks by advance
I followed the instructions. I got this in the verbose snmp querie :
Code: Select all
+ Running data query [12].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.4.1.9600.1.1.1.1.1'
+ Located input field 'diskInstance' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.4.1.9600.1.1.1.1.1'
+ Found item [diskInstance='C:'] index: 2.67.58 [from value]
+ Found item [diskInstance='D:'] index: 2.68.58 [from value]
+ Found item [diskInstance='_Total'] index: 6.95.84.111.116.97.108 [from value]
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/snmp_informant_disk.xml'Code: Select all
09/20/2006 11:45:04 AM - CMDPHP: Poller[0] Host[2] DS[38] WARNING: Result from SNMP not valid. Partial Result:
Repeated 8 times I tried the "<oid_index_parse>" change in the xml file, without success :
The C, D and _Total didn't work at all
Thanks by advance
I have the same problem as moles3144.
The graph aren't create.
I have this message in Graph Debug Mode:
but I add SNMP Informant Disk statistics for my device, I only see 2 rows.
If you have a solution, I am taking.
Cordially
The graph aren't create.
I have this message in Graph Debug Mode:
Code: Select all
ERROR: can't parse ':Free Space (Mb)'but I add SNMP Informant Disk statistics for my device, I only see 2 rows.
If you have a solution, I am taking.
Cordially
Has anyone actuall got this working????
Man,
I can't seem to get any of the graphs working.. I have followed this entire post and all I come up with is.
RRDTool Says:
ERROR: Legend set but no color: Available\:
Anything would be helpful.
I can't seem to get any of the graphs working.. I have followed this entire post and all I come up with is.
RRDTool Says:
ERROR: Legend set but no color: Available\:
Anything would be helpful.
-
rickyboone
- Posts: 4
- Joined: Wed Aug 23, 2006 9:07 am
Any chance of getting an updated version of all templates that address the issues raised in recent messages in this thread? The various "fixed" templates posted somewhere in the middle of this topic don't seem to work well with the original templates, etc. Having the original message updated would prevent a lot of confusion for people trying to add this to their instances of Cacti.
-
richardkraal
- Posts: 3
- Joined: Thu Apr 28, 2005 3:00 pm
-
WizardofAus
- Posts: 7
- Joined: Thu Nov 09, 2006 3:25 pm
- Location: London
Not sure why I am getting O in all my columns? Help
Everything looks great - debug attached and graph pic attached - any ideas. I would be so grateful.
The Cacti log gives me this error, the only error I am getting what could it be?
CMDPHP: Poller[0] Host[18] DS[186] WARNING: Result from SNMP not valid. Partial Result:
c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="uksdcclums0301 - Disk Stats E:Data_1" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit=100 \
--lower-limit=0 \
--vertical-label="Unit (Percent / time)" \
--slope-mode \
DEF:a="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskReadTime:LAST \
DEF:b="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskReadTime:AVERAGE \
DEF:c="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskWriteTim:LAST \
DEF:d="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskWriteTim:AVERAGE \
DEF:e="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentFreeSpace:LAST \
DEF:f="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentFreeSpace:AVERAGE \
DEF:g="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":FreeMegabytes:LAST \
DEF:h="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":FreeMegabytes:AVERAGE \
DEF:i="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadPerSec:LAST \
DEF:j="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadPerSec:AVERAGE \
DEF:ba="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWritePerSec:LAST \
DEF:bb="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWritePerSec:AVERAGE \
DEF:bc="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadQueueLen:LAST \
DEF:bd="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadQueueLen:AVERAGE \
DEF:be="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWriteQueueLe:LAST \
DEF:bf="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWriteQueueLe:AVERAGE \
CDEF:cdefba=g,1024,/ \
CDEF:cdefdb=g,1048576,/ \
COMMENT:"Statistics\n" \
AREA:a#FF6044:"Read Time(%)" \
GPRINTLAST:" Read\: (%1.1lf %%)\n" \
AREA:a#55D6D3:"" \
AREA:c#00BED9:"Write Time(%)" \
GPRINT:c:LAST:" Write\: (%1.1lf %%)\n" \
LINE1:e#004359:"Free Space(%)" \
GPRINT:e:LAST:" Free\: (%1.1lf %%)\n" \
LINE1:e#004359:"" \
LINE1:g#FFC3C0:"Available" \
GPRINT:cdefba:LAST:" Available \: %5.2lf Gb\n" \
LINE1:i#0000FF:"Read per sec\n" \
COMMENT:"Read IO / sec\:" \
GPRINT:i:LAST:" Current\:%8.0lf" \
GPRINT:j:AVERAGE:"Average\:%8.0lf" \
GPRINT:j:MAX:"Maximum\:%8.0lf\n" \
LINE1:ba#DE0056:"Write per sec\:\n" \
COMMENT:"Write IO / sec\:" \
GPRINT:ba:LAST:" Current\:%8.0lf" \
GPRINT:bb:AVERAGE:"Average\:%8.0lf" \
GPRINT:bb:MAX:"Maximum\:%8.0lf\n" \
LINE1:bc#F5F800:"Read Queue\:\n" \
COMMENT:"Read Queue\:" \
GPRINT:bc:LAST:" Current\:%8.0lf" \
GPRINT:bd:AVERAGE:"Average\:%8.0lf" \
GPRINT:bd:MAX:"Maximum\:%8.0lf\n" \
LINE1:be#00FF00:"Write Queue\:\n" \
COMMENT:"Write Queue\:" \
GPRINT:be:LAST:" Current\:%8.0lf" \
GPRINT:bf:AVERAGE:"Average\:%8.0lf" \
GPRINT:bf:MAX:"Maximum\:%8.0lf\n" \
LINE1:cdefdb#7CB3F1:"" \
LINE2:g#ED7600:"Free Space (Mb)"
RRDTool Says:
OK
The Cacti log gives me this error, the only error I am getting what could it be?
CMDPHP: Poller[0] Host[18] DS[186] WARNING: Result from SNMP not valid. Partial Result:
c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="uksdcclums0301 - Disk Stats E:Data_1" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit=100 \
--lower-limit=0 \
--vertical-label="Unit (Percent / time)" \
--slope-mode \
DEF:a="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskReadTime:LAST \
DEF:b="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskReadTime:AVERAGE \
DEF:c="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskWriteTim:LAST \
DEF:d="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentDiskWriteTim:AVERAGE \
DEF:e="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentFreeSpace:LAST \
DEF:f="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":PercentFreeSpace:AVERAGE \
DEF:g="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":FreeMegabytes:LAST \
DEF:h="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":FreeMegabytes:AVERAGE \
DEF:i="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadPerSec:LAST \
DEF:j="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadPerSec:AVERAGE \
DEF:ba="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWritePerSec:LAST \
DEF:bb="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWritePerSec:AVERAGE \
DEF:bc="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadQueueLen:LAST \
DEF:bd="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskReadQueueLen:AVERAGE \
DEF:be="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWriteQueueLe:LAST \
DEF:bf="c\:/inetpub/wwwroot/cacti/rra/uksdcclums0301_freemegabytes_186.rrd":AvgDiskWriteQueueLe:AVERAGE \
CDEF:cdefba=g,1024,/ \
CDEF:cdefdb=g,1048576,/ \
COMMENT:"Statistics\n" \
AREA:a#FF6044:"Read Time(%)" \
GPRINT
LAST:" Read\: (%1.1lf %%)\n" \AREA:a#55D6D3:"" \
AREA:c#00BED9:"Write Time(%)" \
GPRINT:c:LAST:" Write\: (%1.1lf %%)\n" \
LINE1:e#004359:"Free Space(%)" \
GPRINT:e:LAST:" Free\: (%1.1lf %%)\n" \
LINE1:e#004359:"" \
LINE1:g#FFC3C0:"Available" \
GPRINT:cdefba:LAST:" Available \: %5.2lf Gb\n" \
LINE1:i#0000FF:"Read per sec\n" \
COMMENT:"Read IO / sec\:" \
GPRINT:i:LAST:" Current\:%8.0lf" \
GPRINT:j:AVERAGE:"Average\:%8.0lf" \
GPRINT:j:MAX:"Maximum\:%8.0lf\n" \
LINE1:ba#DE0056:"Write per sec\:\n" \
COMMENT:"Write IO / sec\:" \
GPRINT:ba:LAST:" Current\:%8.0lf" \
GPRINT:bb:AVERAGE:"Average\:%8.0lf" \
GPRINT:bb:MAX:"Maximum\:%8.0lf\n" \
LINE1:bc#F5F800:"Read Queue\:\n" \
COMMENT:"Read Queue\:" \
GPRINT:bc:LAST:" Current\:%8.0lf" \
GPRINT:bd:AVERAGE:"Average\:%8.0lf" \
GPRINT:bd:MAX:"Maximum\:%8.0lf\n" \
LINE1:be#00FF00:"Write Queue\:\n" \
COMMENT:"Write Queue\:" \
GPRINT:be:LAST:" Current\:%8.0lf" \
GPRINT:bf:AVERAGE:"Average\:%8.0lf" \
GPRINT:bf:MAX:"Maximum\:%8.0lf\n" \
LINE1:cdefdb#7CB3F1:"" \
LINE2:g#ED7600:"Free Space (Mb)"
RRDTool Says:
OK
- Attachments
-
- Help?
- graph.jpg (22.86 KiB) Viewed 15079 times
-
WizardofAus
- Posts: 7
- Joined: Thu Nov 09, 2006 3:25 pm
- Location: London
I should read..
I shoudl have been more through reading the previous posts
<oid_index_parse>OID/REGEXP:.*\.1\.1\.1\.(.*)$</oid_index_parse>
sorted it all out. awesome stuff
<oid_index_parse>OID/REGEXP:.*\.1\.1\.1\.(.*)$</oid_index_parse>
sorted it all out. awesome stuff
Graph Problems
Hi, I'm new with cacti and my boss ask me to add Disk IO Statistics to the console.
I follow all the steps, all the files installed correctly. All the imports works fine. I read all the pages of this topic and tried many things that are posted here, but the graphs aren't generated.
All the other SNMP information that are gathered from the server works fine and generate the graphs correctly.
I only see under W32 - Disk Statistics the "name of the server - Disk - C:" and the icon of the magnifying glass. I have this for all the units of my server.
I have other counters that when they don't have information create the graph blank, but in this case there is no graph. I imported the graph correctly following the steps. I would appreciate some help here, and sorry about my english.
I follow all the steps, all the files installed correctly. All the imports works fine. I read all the pages of this topic and tried many things that are posted here, but the graphs aren't generated.
All the other SNMP information that are gathered from the server works fine and generate the graphs correctly.
I only see under W32 - Disk Statistics the "name of the server - Disk - C:" and the icon of the magnifying glass. I have this for all the units of my server.
I have other counters that when they don't have information create the graph blank, but in this case there is no graph. I imported the graph correctly following the steps. I would appreciate some help here, and sorry about my english.
Who is online
Users browsing this forum: No registered users and 2 guests