W32 CPU (any number of processors) Perl Script via WMI

[ynot5]

Hi I encountered a script error . can you advise me. I'm using 0.86h

[airwalk]

The bad thing in that script (if used against localhost) is that it queries ProcessorLoad which is a load for the previous second. For me it doesn't give meaningful results as the load of CPU while poller is running usually alomost 100 per cent.

Is there any way to monitor load average (for last 5 min), as it's for routers via snmp?

[Unsafe]

This is probably going to sound dumb but how did you get the background colour white on those graphs??

[cd]

Sorry for the thread necromancy.

Has anyone gotten this script to work correctly with 8 CPU'S?

Cactid just gives the normal

ERROR: Cactid Timed Out While Processing Hosts Internal

But if I have it poll for 4 cpus it works no problem..

[looc]

how can config wmi?
my server: cacti for windows2003
my client:windows2003

[BSOD2600]

Read the FAQ in my installation guide (in signature).

[GiJoe]

Could you post for 8 CPU server?

Thank you.

[cafedelmar]

i got no value and the log shows:

12/25/2007 09:25:36 AM - CMDPHP: Poller[0] Host[20] DS[162] CMD: perl K:/web/default/www/cacti/scripts/w32_query_cpu.pl 192.168.0.70 get LoadPercentage 4, output: U

i run perl <path_cacti>/scripts/w32_query_cpu.pl <hostname> get LoadPercentage 2

and it shows "unable to talk to WMI for .."

so how to talk to WMI...

system:windows 2003
cacti ver:0.8.7a
get cpu information from windows 2000

thanx

[khufure]

Any tips on how to deal with 8 hyperthreaded procs? Each physical processor shows up as two seperate procs as far as the template is concerned. Any help is greatly apprieciated.

Turn off hyperthreading? Most of the time it is a performance degredation.

[tbaror]

Hello,

i am trying to create total of total 4 cpu sources load.
tried to create CDEF like

Code: Select all

a,+,b,+,c,+,d,*,100,/,4

but i cant get any results
since i am newbie in graph can someone please advice
thanks

[Braeburn]

Hello,

Actually, when I try to collect the CPU Load from a Windows 2000 Terminal Server using w32_query_cpu.pl I get empty values.

The command

w32_query_cpu.pl hostname get LoadPercentage 4

gives only

CPU0: CPU1: CPU2: CPU3:

The same command on the localhost gives:

CPU0:2 CPU1:0 CPU2:0 CPU3:24

Are there any special settings which should be set on the Windows 2000 Terminal server?

Thanks in advance for any advice.

Cheers,

B.

[chimpooooo]

Can someone help me with your script. I am trying to monitor 2 cpu's on a win 2003 server but the graph is empty and i am getting "WARNING: Result from CMD not valid. Partial Result: "