UPS Smart APC templates

[NewJoiner]

Unfortunately thats not possible. (wish it was that easy)
I can however execute SNMP gets/walks to MIPS that you would need.

[timi]

post the snmpwalk on that oid

[NewJoiner]

/usr/bin/snmpwalk -v2c -c {com} {ip} .1.3.6.1.4.1.318.1.1.1.2.2.2.0
SNMPv2-SMI::enterprises.318.1.1.1.2.2.2.0 = Gauge32: 23

[timi]

/usr/bin/snmpwalk -v2c -c {com} {ip} .1.3.6.1.4.1.318.1.1.1.2.2.2.0
SNMPv2-SMI::enterprises.318.1.1.1.2.2.2.0 = Gauge32: 23

looks right to me, you can do a debug and watch the logs

[NewJoiner]

In debug mode it mentions RRDTool Says:

ERROR: the RRD does not contain an RRA matching the chosen CF

But I will see if I can check the log file (although thats large... many things in it)

Maybe you can read my attached RRD file (see earlier post)

Chrs

[m0rf]

Hello,
I know how to solve the problem of the lack of graphs "APC Smart UPS Battery Temp". This problem in template.
Need change the Consolidation Function (CF Type) frоm LAST to AVARAGE

cacti.png (24.14 KiB) Viewed 3898 times

timi>
Please, fix it problem in you template pack "cacti_host_template_apc_smart_ups_14"

[colifa]

The Battery Temp graph was not working for me until I changed the aggregation function in the graph template from LAST to AVERAGE.

Thank you for a great template.

Pablo

[aes222ripn]

Please add a graph battery Charge and Voltage, as implemented in PowerWare

UPS-MIB::upsEstimatedChargeRemaining.0 (.1.3.6.1.2.1.33.1.2.4.0)
UPS-MIB::upsBatteryVoltage.0 (.1.3.6.1.2.1.33.1.2.5.0)