network map

weathermap4rrd · Post by **weathermap4rrd** » Mon May 30, 2005 4:34 pm

Hi,

just to let you know that an editor is available for Weathermap4rrd

even if it's still a beta version

An online demo could be test at :
http://weathermap4rrd.tropicalex.net/demoeditor/

Alex
http://weathermap4rrd.tropicalex.net

mgb · Post by **mgb** » Tue May 31, 2005 2:09 am

Very impressive,

Are you willing to integrate your version with cacti as a plugin?
it looks like several people are working towards the same end result. Maybe it's better to team up? I will offer my limited program skill's to such a team.
Although weathermap could exist as a seperate program, integrating it with cacti would make sense.

Michael

qwaskita · Post by **qwaskita** » Wed Jun 01, 2005 4:51 am

would be nice if we can use weathermap to monitor ss7 as well

.... have you ever ?

ssams · Post by **ssams** » Wed Jun 01, 2005 3:49 pm

can you use labels and icons together? seems when i use an icon my label is not displayed. i read some caveat but didnt quite understand.

here is what i did that doesnt work - only see icon

NODE idca
LABEL IDC A Router
POSITION 300 200
ICON icon/cisco_small_router.png

ssams · Post by **ssams** » Wed Jun 01, 2005 3:53 pm

weathermap4rrd wrote:Hi,

just to let you know that an editor is available for Weathermap4rrd
even if it's still a beta version

An online demo could be test at :
http://weathermap4rrd.tropicalex.net/demoeditor/

Alex
http://weathermap4rrd.tropicalex.net

tried this version and i get the following
Fatal error: Call to undefined function imagefontwidth() in /www/htdocs/cacti/phpwm/config_tool.php on line 153

line 153 is the following
$pix_width[$node]=imagefontwidth($police)*strlen($label[$node]);

any ideas?

mgb · Post by **mgb** » Thu Jun 02, 2005 2:33 am

@ssams

Th reason you're not seeing a label (I refer to the Howie version) is that the icon is placed on top of the label. It's possible to reate a second node with only the label but it can't be drawn in the same space as the icon.

Michael

weathermap4rrd · Post by **weathermap4rrd** » Sat Jun 04, 2005 6:13 am

Hi ssams,

it is not useful to set up position of icon if you want to display it at the same position as the label.

You should remove "POSITION 300 200" and use :
NODE idca
LABEL IDC A Router
ICON icon/cisco_small_router.png

I'm talking about Weathermap4rrd version not the howie one.

About your imagefontwidth() error, it is probably because php-gd is not installed or not detected or it is not a recent version.

Alex
http://weathermap4rrd.tropicalex.net

ssams · Post by **ssams** » Sat Jun 04, 2005 9:23 am

thanks.

got the issue resolved on the GD.

tubbie · Post by **tubbie** » Sat Jun 04, 2005 1:10 pm

Hi

I'm playing around with weather4rrd and Howie's php-weathermap version. One thing though, i'm not getting any current bitrate or percentage on all the links created within php-weathermap. Within weather4rrd the percentages and rates are all okay. I'm using the same rrd's for both versions.

Any ideas?

Dennis

PS: some output from weathermap.php:
________________________________________
ReadData: Updating link data for all links
ReadData: Updating link server1-switch from ../rra/server1_traffic_in_29.rrd
ReadFromRRD: Running: /usr/local/bin/rrdtool fetch '../rra/server1_traffic_in_29.rrd' AVERAGE --start now-400
> 1117908000: 1.3816577778e+01 8.1953777778e+00
> 1117908300: 1.2954688889e+01 7.7397333333e+00
> 1117908600: NaN NaN
> --
--1117908600: NaN NaN

ReadFromRRD: Found a good line: 1117908600: NaN NaN
( traffic_in traffic_out
)
--1117908300: 1.2954688889e+01 7.7397333333e+00

--1117908000: 1.3816577778e+01 8.1953777778e+00

ReadFromRRD: Our line is 1117908600: NaN NaN

ReadFromRRD: Returning (110.532622224,65.5630222224)
ReadDate: Setting 110.532622224,65.5630222224
________________________________________

Howie · Post by **Howie** » Mon Jun 06, 2005 2:22 am

tubbie wrote:
ReadFromRRD: Found a good line: 1117908600: NaN NaN
( traffic_in traffic_out
)

Fixed this in 0.5. I'd assumed that RRDtool always outputs the same thing when there is no data (sometimes it's NaN, nan, whatever, but it comes from the compiler's libraries so it can't be checked). As soon as I've tested the change I'll put it up, along with the other stuff waiting... real work has been busy!

tubbie · Post by **tubbie** » Mon Jun 06, 2005 3:59 am

Howie wrote:
tubbie wrote:
ReadFromRRD: Found a good line: 1117908600: NaN NaN
( traffic_in traffic_out
)
Fixed this in 0.5. I'd assumed that RRDtool always outputs the same thing when there is no data (sometimes it's NaN, nan, whatever, but it comes from the compiler's libraries so it can't be checked). As soon as I've tested the change I'll put it up, along with the other stuff waiting... real work has been busy!

Thnx Howie for the quick reply! I'll wait for 0.5 and try again.

philuxe · Post by **philuxe** » Thu Jun 09, 2005 10:08 am

Hi all,

I'm trying to install the php-weathermap_0.4
I use a Fedora Core 2 and I cant find any php-gd module for this distribution, but I can find it for FC3 :/

So when I launch "php weathermap.php"

it returns me :

PHP Warning: fopen(weathermap.conf): failed to open stream: No such file or directory in /root/weathermap/php-weathermap-0.4/Weathermap.class.php on line 685
Content-type: text/html
X-Powered-By: PHP/4.3.10

Couldn't open config file weathermap.conf for reading

The file weathermap.conf is not present in the tarball, i m wondering if my php-gd is really the cause of my trouble ???

Thanks in advance

EDIT : the "php -m" command says me that the GD module is present, where shall I get the missing conf file ?

Howie · Post by **Howie** » Thu Jun 09, 2005 10:40 am

philuxe wrote: The file weathermap.conf is not present in the tarball, i m wondering if my php-gd is really the cause of my trouble ???

EDIT : the "php -m" command says me that the GD module is present, where shall I get the missing conf file ?

The weathermap.conf file is what describes your network, which is why it isn't in the tarball

I'd suggest having a read of the manual...

ssams · Post by **ssams** » Thu Jun 09, 2005 11:07 am

is there a way to increase the background size? it appears to be locked at 800x600? i tried not specifying a background but i dont think that helped. i want to display this on an 80" wall screen with a projector so we can run a high resolution. it will allow me to get much more on the screen.
thanks

Howie · Post by **Howie** » Thu Jun 09, 2005 11:11 am

ssams wrote:is there a way to increase the background size? it appears to be locked at 800x600? i tried not specifying a background but i dont think that helped. i want to display this on an 80" wall screen with a projector so we can run a high resolution. it will allow me to get much more on the screen.
thanks

Code: Select all

WIDTH 1280
HEIGHT 1024

or use a background that is the size you want.

(Also in the Fantastic Manual

).

Cacti

network map

nice

Who is online