Liebert Air Conditioners

[aragones]

Hmm I think im on the right path I copied the graph Template and removed everything but the 1st 4 lines! So now im adding / removing things and seeing how RRD works with it

I'll check out the CDEF's as well

thx!

[winglm]

How do I set up Liebert Air Conditioners ? Why show only nan?
Thanks!!

[fstwrks]

Hmm I think im on the right path I copied the graph Template and removed everything but the 1st 4 lines! So now im adding / removing things and seeing how RRD works with it

I'll check out the CDEF's as well

thx!

Sorry in advance for dredging up an old thread...

Did you ever have any luck getting this working?
I'm getting the ERROR: invalid rpn expression in: b,10,/,h,+

Any help anyone could provide would be greatly appreciated.

Hello Cacti forum members, btw. No longer lurking...

[Esse]

i have the same issue did anyone get this resolved?

[Shmegles]

Here are some other graphs to use for Liebert AC units. Includes: % of cooling used, component hours runtime, humidity and temperature.

[scrupul0us]

Did the OP ever fix the CDEF error?

[noname]

Did the OP ever fix the CDEF error?

"Humidity High Set" = X + "Humidity Tolerance"
"Humidity Low Set" = X - "Humidity Tolerance"
"Temperature High Set" = Y + ("Temp DegF Tolerance" / 10)
"Temperature Low Set" = Y - ("Temp DegF Tolerance" / 10)

I'm not sure what values are appropriate for X and Y.
But if X means "Humidity Setpoint" and Y means "Temp DegF Setpoint",
then try to replace "Custom String: h" with "g" in each CDEF definition (hum_highset, hum_lowset, temp_highset, temp_lowset).

[kjstech]

Anyone figure this out? Graphs are not drawing and I have the same issue as the op.

Tried one of the other graphs later posted in here and got the xml hash value error. Did a find and replace for 0021 replace to 0019 and imported that. That's not drawing either. Liebert HVAC Cooling Used - ERROR: parameter '#0000FFFF' does not represent a number in line AREA:#0000FFFF:Cooling Used\:

[kjstech]

I changed the cdef reference from h to g. Graphs show now but all valuses are -nan.

[kjstech]

Did anyone get this working? I also changed the h to a g as referenced in those particular CDEF's and I get blank graphs with nothing plotted and all values equal to -nan.

[anmomin1]

Have anyone every figured out.
I tried but original graph and last graphs....temperature and Humidity don't work..
only cooling used is graphing,,,
I assume OID or MIBs not working.