How to draw lines at an angle of 90°

[Howie]

Not sure what you mean by rectangular frame... you mean the box around the node? It's always centred at the POSITION point.

[EAleg]

Not sure what you mean by rectangular frame... you mean the box around the node? It's always centred at the POSITION point.

Hmm, i meah the box, on the link.

[Howie]

Check out the diagram on the front page of the manual. It covers a lot of these (including this one).

https://www.network-weathermap.com/manu ... /howto.png

[EAleg]

Check out the diagram on the front page of the manual. It covers a lot of these (including this one).

https://www.network-weathermap.com/manu ... /howto.png

I have seen this picture. When i type BWLABELPOS (Example 7) nothing happens... Example:
LINK node03018-node03020
WIDTH 2
BWLABELPOS 7
NODES node03018 node03020

[Howie]

1) The logs will tell you that this is invalid

2) The reason it's invalid is that you need to give TWO numbers. One for the 'in' box and one for the 'out' box.

[EAleg]

1) The logs will tell you that this is invalid

2) The reason it's invalid is that you need to give TWO numbers. One for the 'in' box and one for the 'out' box.

Thank you, i managed to do this!

[EAleg]

Hello Howie, your previous answers very helpful, pls, can u give another one answer for my question? I found similar topic, but cannot find solution for my problem.
We have a node, how i can change the color in this rectangle? By default is white. And for example, when Node crashing, it change color in red or yellow. I attach the picture below. Thank you Howie!

[Howie]

Where are you getting the information that it is crashing from? Cacti status or something else?

[EAleg]

Where are you getting the information that it is crashing from? Cacti status or something else?

From Links, i mean... when speed down to 0%, the state changes (for example) in red. Yeah, from table (Where color matches speed).

It will be a lot of manual work... nodes often have more than one link. So you'd want the total of all those links. And when you add a new link, add it to the right nodes.

Code: Select all

SCALE zerotraffic 0 0.1   255 0 0
SCALE zerotraffic 0 100  0 255 0

NODE n1
  TARGET link1.rrd link2.rrd link3.rrd
  USESCALE zerotraffic

[EAleg]

Where are you getting the information that it is crashing from? Cacti status or something else?

From Links, i mean... when speed down to 0%, the state changes (for example) in red. Yeah, from table (Where color matches speed).

It will be a lot of manual work... nodes often have more than one link. So you'd want the total of all those links. And when you add a new link, add it to the right nodes.

Code: Select all

SCALE zerotraffic 0 0.1   255 0 0
SCALE zerotraffic 0 100  0 255 0

NODE n1
  TARGET link1.rrd link2.rrd link3.rrd
  USESCALE zerotraffic

Oka-a-y, what if vice versa? How to draw so that only nodes are visible on the map? It turns out that the links should be invisible or something... There are 5 cities, say, and make sure that only they are displayed in working condition. And if the node falls off, it lights up in red.

[Howie]

Do the same thing with the node targets, but don't add the links. The game is the same - you need a value to check if it's zero.

[EAleg]

Good Day Howie, pls, tell me, how make one link between two maps, for example map#1 Kiev to map#2 London? What i must type in link or node?

I found this guide https://www.network-weathermap.com/2016 ... ween-maps/ but i cannot understand this guide )=

Thank you for answer!

[Howie]

UImm, I wrote the guide, so I guess I'm the wrong person to answer...

You get the URL of the other map's Cacti page, and you put it in INFOURL for the node you want to click on the first map.

[EAleg]

UImm, I wrote the guide, so I guess I'm the wrong person to answer...

You get the URL of the other map's Cacti page, and you put it in INFOURL for the node you want to click on the first map.

E-m-m-m what i must type in the LINK? O_o Or how i must connect link?

[EAleg]

UImm, I wrote the guide, so I guess I'm the wrong person to answer...

You get the URL of the other map's Cacti page, and you put it in INFOURL for the node you want to click on the first map.

How to draw a link that will go beyond the boundaries of the map?