Problem with graph export

[TheWitness]

What does the Graph Debug syntax look like? Is the graph rendering?

[dado]

The graph debug look good and is rendered correctly only the export of the secondary image create a problem.
The thumb of the first image is create correctly

Code: Select all

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title='Localhost - Advanced Ping' \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit='10' \
--lower-limit='0' \
--units-exponent='1' \
--vertical-label='milliseconds' \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/www/cacti/rra/localhost_loss_8.rrd":min:AVERAGE \
DEF:b="/var/www/cacti/rra/localhost_loss_8.rrd":avg:AVERAGE \
DEF:c="/var/www/cacti/rra/localhost_loss_8.rrd":max:AVERAGE \
DEF:d="/var/www/cacti/rra/localhost_loss_8.rrd":loss:AVERAGE \
DEF:e="/var/www/cacti/rra/localhost_loss_8.rrd":dev:AVERAGE \
CDEF:cdefg=d,0,GT,d,2,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefh=d,3,GT,d,5,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefi=d,5,GT,d,10,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefj=d,10,GT,d,15,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefba=d,15,GT,d,50,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefbb=d,50,GT,d,95,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefbc=d,95,GT,d,100,GT,UNKN,INF,IF,UNKN,IF \
CDEF:cdefbd=d,UN,1,EQ,TIME,300,+,NOW,GT,UNKN,INF,IF,d,95,GT,INF,UNKN,IF,IF \
CDEF:cdefbf=e,2,/ \
CDEF:cdefbh=c,b,-,e,-,3,/ \
CDEF:cdefcd=d,0,GT,d,2,GT,UNKN,b,IF,UNKN,IF \
CDEF:cdefce=d,3,GT,d,5,GT,UNKN,b,IF,UNKN,IF \
CDEF:cdefcf=d,5,GT,d,10,GT,UNKN,b,IF,UNKN,IF \
CDEF:cdefcg=d,10,GT,d,15,GT,UNKN,b,IF,UNKN,IF \
CDEF:cdefch=d,15,GT,d,50,GT,b,INF,IF,UNKN,IF \
CDEF:cdefci=d,50,GT,d,95,GT,UNKN,b,IF,UNKN,IF \
CDEF:cdefcj=d,95,GT,d,100,GT,UNKN,b,IF,UNKN,IF \
LINE1:a:""  \
LINE1:b:""  \
LINE1:c:""  \
LINE1:d:""  \
LINE1:e:""  \
COMMENT:"   Pkt Loss\:"  \
AREA:cdefg#AFECEDFF:"1-2%"  \
AREA:cdefh#55D6D3FF:"3-5%"  \
AREA:cdefi#7CB3F1FF:"6-10%"  \
AREA:cdefj#4668E4FF:"11-15%"  \
AREA:cdefba#A150AAFF:"16-50%"  \
AREA:cdefbb#FF00FFFF:"51-95%"  \
AREA:cdefbc#F51D30FF:"96-100%"  \
COMMENT:"Unknown\n"  \
AREA:b#FFFFFFFF:""  \
AREA:cdefbf#333333FF:"":STACK \
AREA:cdefbf#555555FF:"":STACK \
AREA:cdefbh#888888FF:"":STACK \
AREA:cdefbh#AAAAAAFF:"":STACK \
AREA:cdefbh#CCCCCCFF:"":STACK \
GPRINT:d:AVERAGE:"   Avg Loss\:%6.2lf%%"  \
GPRINT:d:MAX:"Max Loss\:%6.2lf%%\n"  \
COMMENT:"    Latency\:"  \
AREA:cdefcd#AFECEDFF:""  \
AREA:cdefce#55D6D3FF:""  \
AREA:cdefcf#7CB3F1FF:""  \
AREA:cdefcg#4668E4FF:""  \
AREA:cdefch#A150AAFF:""  \
AREA:cdefci#FF00FFFF:""  \
AREA:cdefcj#F51D30FF:""  \
GPRINT:a:AVERAGE:"Min\:%8.2lf ms"  \
GPRINT:b:AVERAGE:"Avg\:%8.2lf ms"  \
GPRINT:c:MAX:"Max\:%8.2lf ms"  \
GPRINT:e:AVERAGE:"Dev\:%8.2lf ms\n"  \
COMMENT:"Avg Latency\:"  \
LINE1:b#00BD27FF:"
" 

RRDTool Says:

OK

[TheWitness]

I think the final line of the graph template is using a special character that for whatever reason is being truncated. Can you edit the Graph Template and add some information to the last LINE1 in the text value field and see if the segfault goes away?

TheWitness

[dado]

Can you explain me how i can do this operation?
I'm totally noobie

Thanks,
Dado

[dado]

Ok, i figure out how add that character, now the query works on cmd line but still the images are not generated..