REQUEST: 95th percentile both directions + Bandwidth total

Post by **rony** » Wed May 13, 2009 9:11 am

Edit the data query, the <cacti_path> variable got screwed up.

BSOD2600 · Post by **BSOD2600** » Wed May 13, 2009 1:32 pm

double posting is not tolerated.

cmarticus · Post by **cmarticus** » Wed May 13, 2009 1:40 pm

Sorry about that it was a long night. Wasn't sure where to post it. I had to restore my sql from a backup to get it going again. I will attempt again later

cmarticus · Post by **cmarticus** » Wed May 13, 2009 5:19 pm

Ok I got that issue cleared up and added a new graph for bits in/out 95th percentile 64 bit. the graph shows up but is not graphing.

iggi · Post by **iggi** » Thu May 14, 2009 10:01 am

cmarticus - you have to watch that double posting!

After importing this template, the rrd files are not updating or being created, I checked the log file and it shows information being retrieved (I am unable to find ANY errors in the log). I checked http://docs.cacti.net/manual:087:4_help.2_debugging and cannot find any issues up until the issue of non existent rrd files.

P.S.- I am using 1 minute polling.

Post by **rony** » Thu May 14, 2009 10:39 am

I have uploaded the fixed version of the template. There was a export issue that caused it to break, which I will be looking at....

The template has been fixed, please let me know if you have issues with it now.

cmarticus · Post by **cmarticus** » Thu May 14, 2009 11:30 am

My cacti log shows
05/14/2009 09:25:51 AM - SPINE: Poller[0] Host[24] DS[661] SNMP: v2: 207.162.208.129, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.1, value: U

The RRD is being created and updated every 5 minutes

but that particular graph is still empty.

The rest of the interface graphs all 32 bit are fine.

Post by **rony** » Thu May 14, 2009 1:48 pm

Make sure that you are using SNMPv2 with the device in question.

cmarticus · Post by **cmarticus** » Thu May 14, 2009 2:35 pm

Definately using snmpv2.

Do I need to create a different graph template for 95th percentile 64 bit counter?

Post by **rony** » Thu May 14, 2009 6:17 pm

I don't know on the redbacks....

iggi · Post by **iggi** » Fri May 15, 2009 11:40 am

I am still getting non responsive graphs with a cisco SMB switch, it worked just fine before, but still didn't work with the updated template.

It seems that the issue is causing rrd files to not update or be created.

cmarticus · Post by **cmarticus** » Fri May 15, 2009 12:58 pm

I changed the counters on the existing 32 bit graph to the 64 bit settings and that worked. not sure why the new graph with the 64 bit settings didn't work. All I know is I broke 115 now! Thanks rony

jehan.procaccia · Post by **jehan.procaccia** » Mon May 18, 2009 4:00 pm

I would really appreciate to import that graph template to my Version 0.8.7b.
Unfortunatly , that one seems to have been generated on "0.8.7d" => "0018" (regarding global_arrays.php) , although I hacked my global_arrays.php cacti still refuses to import it

please let me know how I can graph the 95percentile on my 1Go interface where now traffic goes over 100Mbits/s !

Thanks.

iggi · Post by **iggi** » Mon May 18, 2009 6:26 pm

Is there possibly an easy way to add 95% and total bandwidth on one graph? I tried but horribly failed with the data query.

diddi · Post by **diddi** » Tue Jun 02, 2009 3:49 am

I slightly modified Tony's Template -- it does the 95th percentile for in and out seperately (64-bit) in BYTES. Nothing fancy, but might be useful for newbies.

Christian

PS: How can I export the data query and the graph template in _one_ file?

Cacti

REQUEST: 95th percentile both directions + Bandwidth total

Who is online