viewing graph presets for more then 2 days

[nurbo]

Hi there,

Finally i have some time to look into this issue.

here is the information you asked for:

filename = "..\Inetpub\wwwroot\cacti\rra\rtbjavaprincipal_traffic_in_390.rrd"
rrd_version = "0003"
step = 300
last_update = 1207843443
ds[traffic_in].type = "COUNTER"
ds[traffic_in].minimal_heartbeat = 600
ds[traffic_in].min = 0.0000000000e+000
ds[traffic_in].max = 1.2800000000e+005
ds[traffic_in].last_ds = "1281694847"
ds[traffic_in].value = 1.2922836877e+005
ds[traffic_in].unknown_sec = 0
ds[traffic_out].type = "COUNTER"
ds[traffic_out].minimal_heartbeat = 600
ds[traffic_out].min = 0.0000000000e+000
ds[traffic_out].max = 1.2800000000e+005
ds[traffic_out].last_ds = "2639546832"
ds[traffic_out].value = 8.2816741196e+005
ds[traffic_out].unknown_sec = 0
rra[0].cf = "AVERAGE"
rra[0].rows = 600
rra[0].pdp_per_row = 1
rra[0].xff = 5.0000000000e-001
rra[0].cdp_prep[0].value = NaN
rra[0].cdp_prep[0].unknown_datapoints = 0
rra[0].cdp_prep[1].value = NaN
rra[0].cdp_prep[1].unknown_datapoints = 0
rra[1].cf = "MAX"
rra[1].rows = 600
rra[1].pdp_per_row = 1
rra[1].xff = 5.0000000000e-001
rra[1].cdp_prep[0].value = NaN
rra[1].cdp_prep[0].unknown_datapoints = 0
rra[1].cdp_prep[1].value = NaN
rra[1].cdp_prep[1].unknown_datapoints = 0

C:\RRDTool>

Is there something that is limitating the data to 2 days?

A CPU rrd file that works fine:

filename = "..\Inetpub\wwwroot\cacti\rra\rtbjavaprincipal_5min_cpu_377.rrd"
rrd_version = "0003"
step = 300
last_update = 1207844042
ds[5min_cpu].type = "GAUGE"
ds[5min_cpu].minimal_heartbeat = 600
ds[5min_cpu].min = 0.0000000000e+000
ds[5min_cpu].max = 1.0000000000e+002
ds[5min_cpu].last_ds = "UNKN"
ds[5min_cpu].value = 0.0000000000e+000
ds[5min_cpu].unknown_sec = 0
rra[0].cf = "AVERAGE"
rra[0].rows = 600
rra[0].pdp_per_row = 1
rra[0].xff = 5.0000000000e-001
rra[0].cdp_prep[0].value = NaN
rra[0].cdp_prep[0].unknown_datapoints = 0
rra[1].cf = "AVERAGE"
rra[1].rows = 700
rra[1].pdp_per_row = 6
rra[1].xff = 5.0000000000e-001
rra[1].cdp_prep[0].value = 1.8066666667e+000
rra[1].cdp_prep[0].unknown_datapoints = 0
rra[2].cf = "AVERAGE"
rra[2].rows = 775
rra[2].pdp_per_row = 24
rra[2].xff = 5.0000000000e-001
rra[2].cdp_prep[0].value = 1.8066666667e+000
rra[2].cdp_prep[0].unknown_datapoints = 0
rra[3].cf = "AVERAGE"
rra[3].rows = 797
rra[3].pdp_per_row = 288
rra[3].xff = 5.0000000000e-001
rra[3].cdp_prep[0].value = 8.1976666667e+001
rra[3].cdp_prep[0].unknown_datapoints = 0
rra[4].cf = "MAX"
rra[4].rows = 600
rra[4].pdp_per_row = 1
rra[4].xff = 5.0000000000e-001
rra[4].cdp_prep[0].value = NaN
rra[4].cdp_prep[0].unknown_datapoints = 0
rra[5].cf = "MAX"
rra[5].rows = 700
rra[5].pdp_per_row = 6
rra[5].xff = 5.0000000000e-001
rra[5].cdp_prep[0].value = 1.0000000000e+000
rra[5].cdp_prep[0].unknown_datapoints = 0
rra[6].cf = "MAX"
rra[6].rows = 775
rra[6].pdp_per_row = 24
rra[6].xff = 5.0000000000e-001
rra[6].cdp_prep[0].value = 1.0000000000e+000
rra[6].cdp_prep[0].unknown_datapoints = 0
rra[7].cf = "MAX"
rra[7].rows = 797
rra[7].pdp_per_row = 288
rra[7].xff = 5.0000000000e-001
rra[7].cdp_prep[0].value = 1.0000000000e+000
rra[7].cdp_prep[0].unknown_datapoints = 0

C:\RRDTool>
C:\RRDTool>

Can you help me spot the diferences between both?

Thank you veru much.

[nurbo]

Hi,

I am going to do a full new installation of the new cacti version on a different server.
I am going to follow the new manual that you refer in your signature.

I will see if the 2 day data problem ocurs again, if so i will report it in this thread.

bye.

[gandalf]

Sorry, must have missed the previous entry.
It's obvious from the rrdtool info, that the first file only holds 600 entries for he first consolidation level (5 min). This makes about 2 days worth of data. Verify your rra settings and the relation between Data Template and RRAs used
Reinhard