Cacti on Plesk server

[Wimpi]

Hello,

I've got a Redhat ES4 with Plesk server.

Is it possible to run Cacti on a Plesk server?

I tried it but it doesn't work. When i want to add a device i get a snmp error.

Does someone has a manual or something like that?

Hope you can help me.

[Wimpi]

OK. I've got the snmp error fixed but now i get no images. In the cacti log it al seems fine:

----
01/04/2007 02:50:04 PM - SYSTEM STATS: Time:1.1148 Method:cmd.php Processes:1 Threads:N/A Hosts:3 HostsPerProcess:3 DataSource
s:7 RRDsProcessed:6
----

Does someone has an idea?

[gandalf]

Please post a screenshot for the "Graphs" Tab
Reinhard

[Wimpi]

In the rra folder i see the .rrd files.

Here is the screenshot Graph Tab:

[gandalf]

What happens, if you click the "weird graph"?
And please select one failing graph from graph management. Select DEBUG and post the whole rrdtool graph statement as well
Reinhard

[Wimpi]

When i click on it i get 4 same picture as the image.

When i do the debug mode i get the following:
----------
RRDTool Command:

/usr/local/rrdtool-1.2.15/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Slang - Traffic - 47" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
DEF:a="/var/www/vhosts/noc.netaffairs.nl/httpdocs/cacti/rra/slang_traffic_in_9.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/vhosts/noc.netaffairs.nl/httpdocs/cacti/rra/slang_traffic_in_9.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdeff=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total In\: 0 bytes\n" \
LINE1:cdeff#002A97:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total Out\: 0 bytes"
RRDTool Says:
------

[arcthelab]

I have this problem too. Any solution?

Thks

[gandalf]

Please run from cli

Code: Select all

/usr/local/rrdtool-1.2.15/bin/rrdtool graph /tmp/foo.png \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Slang - Traffic - 47" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
DEF:a="/var/www/vhosts/noc.netaffairs.nl/httpdocs/cacti/rra/slang_traffic_in_9.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/vhosts/noc.netaffairs.nl/httpdocs/cacti/rra/slang_traffic_in_9.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdeff=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total In\: 0 bytes\n" \
LINE1:cdeff#002A97:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total Out\: 0 bytes" 

Reinhard

[edinandy]

I had a similar problem that seemed to be caused by PHP safe mode being turned on in the Plesk control panel. I switched it off and now it seems to work fine.

Does Plesk need safe mode turned off?