[Solved] Device OpenBSD 3.9 and SNMP V3

rodolphedj · Post by **rodolphedj** » Fri Apr 20, 2007 8:58 am

Hello,

I am searching a feedback host OpenBSD on device in Cacti.

Thanks.

fmangeant · Post by **fmangeant** » Fri Apr 20, 2007 9:26 am

Hi

do you want to graph an OpenBSD server, or install Cacti on an OpenBSD server ?

rodolphedj · Post by **rodolphedj** » Fri Apr 20, 2007 9:31 am

I want monitoring OpenBSD.

My server Cacti is on Linux SLES9 and work good

but, I don't have the good config for monitoring OpenBSD... I am searching

The same config "snmpd.conf" from Linux host can't the same on host OpenBSD

-> snmp information = snmp error

rodolphedj · Post by **rodolphedj** » Thu Apr 26, 2007 3:42 am

Up ...

I am always searching

fmangeant · Post by **fmangeant** » Thu Apr 26, 2007 4:35 am

Hi

can you try with only this in snmpd.conf :

Code: Select all

rocommunity public

Also, are you sure Net-SNMP is running on your OpenBSD host ? Any firewall between Cacti and it ?

rodolphedj · Post by **rodolphedj** » Thu Apr 26, 2007 5:24 am

The OpenBSD is on the same LAN
It is a firewall, i have add the rule.

SNMP Information can be obtain.

I can use Verbose Query with good result.

But When after use a data sources from templates, i have on log :
WARNING: Result from SNMP not valid. Partial Result:

With all temlpates

In log on OpenBSD : no error.
connect from x.x.x.x

fmangeant · Post by **fmangeant** » Thu Apr 26, 2007 1:05 pm

Which host template ar you using to graph the OpenBSD server ?

rodolphedj · Post by **rodolphedj** » Thu Apr 26, 2007 3:56 pm

- CPU
-Traffic on interfaces

fmangeant · Post by **fmangeant** » Fri Apr 27, 2007 7:11 am

Can you add a device with the "ucd/net SNMP" host template ?

rodolphedj · Post by **rodolphedj** » Fri Apr 27, 2007 7:32 am

Exactly same error :
WARNING: Result from SNMP not valid. Partial Result:

But, I can obtain by verbose mode :
- SNMP - Interface Statistics Success [46 Items, 7 Rows]
- ucd/net - Get Monitored Partitions Success [3 Items, 3 Rows]

I have tested many Graph Template without success...

rodolphedj · Post by **rodolphedj** » Wed May 02, 2007 4:57 am

Up

Anybody know openbsd's users ?

rodolphedj · Post by **rodolphedj** » Wed May 02, 2007 6:51 am

If I use the template "Unix - Processes", there is not warning.
Samething for template "Unix - Load Average"

I can obtain graphic for this templates.

Post by **gandalf** » Wed May 02, 2007 12:52 pm

I don't like those UNIX* templates. Personally, I prefer running those hosts with teh "ucd/net-snmp" Host Template. It uses snmp for data retrieval. Should work better even with BSD
Reinhard

rodolphedj · Post by **rodolphedj** » Thu May 03, 2007 3:00 am

Sorry, but I can't use ucd/net without have error :

05/03/2007 09:55:15 AM - SYSTEM STATS: Time:14.2333 Method:cmd.php Processes:1 Threads:N/A Hosts:11 HostsPerProcess:11 DataSources:124 RRDsProcessed:85
05/03/2007 09:55:15 AM - CMDPHP: Poller[0] Host[18] DS[204] WARNING: Result from SNMP not valid. Partial Result:
05/03/2007 09:55:13 AM - CMDPHP: Poller[0] Host[18] DS[202] WARNING: Result from SNMP not valid. Partial Result:
05/03/2007 09:55:11 AM - CMDPHP: Poller[0] Host[18] DS[203] WARNING: Result from SNMP not valid. Partial Result:

rodolphedj · Post by **rodolphedj** » Thu May 03, 2007 4:11 am

Perhaps an idea of my problem :
Sometimes, 1 time on 2 :
I can obtain result of SNMP Information on Cacti.

But I see by tcpdump the really request on my host....

???

???

[Solved] Device OpenBSD 3.9 and SNMP V3

[Solved] Device OpenBSD 3.9 and SNMP V3

Who is online