LINK OVERLIBGRAPH is blinking when mouse on it

Support questions about the Network Weather Map plugin

Moderators: Developers, Moderators

Post Reply
sirantd
Posts: 2
Joined: Fri Apr 13, 2007 12:40 am

LINK OVERLIBGRAPH is blinking when mouse on it

Post by sirantd »

Hi,

Have a strange problem. Some (not all) overlibgraph on links are blinking when mouse on. It under Mozilla Firefox 2.0.0.3. Under IE 6.0 it not open, then i mouse out from link and try again. After several mouse on mouse out it load and all ok.

Anybody have same problem ?
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: LINK OVERLIBGRAPH is blinking when mouse on it

Post by Howie »

sirantd wrote:Hi,

Have a strange problem. Some (not all) overlibgraph on links are blinking when mouse on. It under Mozilla Firefox 2.0.0.3. Under IE 6.0 it not open, then i mouse out from link and try again. After several mouse on mouse out it load and all ok.

Anybody have same problem ?
I have had this in the past, and it turned out to be that I had set OVERLIBWIDTH and OVERLIBHEIGHT, but I had set them to a too-small value. Try setting these and setting them to the width and height of your graphs.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
sirantd
Posts: 2
Joined: Fri Apr 13, 2007 12:40 am

Post by sirantd »

For me help remove OVERLIBWIDTH and OVERLIBHEIGHT from DEFAULT section. It's was same as graph size, but i also try without success to set it on 10 more then really graph size.

One more question - is it possible to write overlibgraph upper from mouse cursor and lefter instead bottom right when node in bottom right corner ?
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Post by Howie »

sirantd wrote:For me help remove OVERLIBWIDTH and OVERLIBHEIGHT from DEFAULT section. It's was same as graph size, but i also try without success to set it on 10 more then really graph size.

One more question - is it possible to write overlibgraph upper from mouse cursor and lefter instead bottom right when node in bottom right corner ?
If you set OVERLIBWIDTH and OVERLIBHEIGHT, that's exactly what it does :-) It uses that info to work out if the graph would have gone off the side, and flip it.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests