Grpahs not showing values at bottom?

[SteveG]

Our cacti system was accidentally upgraded to -0.8.6j which broke quite a bit of stuff.

I've since performed a clean install and restore the SQL,RRD and plugins. I have one small problem left in that the graphs are displaying fine but the values aren't shown underneath - see attached.

Here's the debug

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=1171546668 \
--end=1171633068 \
--title="BCC33CO01X01 - CPU Usage" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit=100 \
--lower-limit=0 \
COMMENT:"From 2007/02/15 13\:37\:48 To 2007/02/16 13\:37\:48\c" \
COMMENT:" \n" \
--vertical-label="percent" \
--slope-mode \
DEF:a="/var/www/cacti/rra/bcc33co01x01_1min_cpu_4420.rrd":1min_cpu:AVERAGE \
DEF:b="/var/www/cacti/rra/bcc33co01x01_5sec_cpu_4422.rrd":5sec_cpu:AVERAGE \
DEF:c="/var/www/cacti/rra/bcc33co01x01_5min_cpu_4421.rrd":5min_cpu:AVERAGE \
AREA:a#96E78A:"1 Minute" \
GPRINTLAST:" Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n" \
LINE1:b#FF0000:"5 Seconds" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n" \
LINE1:c#0000FF:"5 Minutes" \
GPRINT:c:LAST:"Current\:%8.2lf %s" \
GPRINT:c:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:c:MAX:"Maximum\:%8.2lf %s\n"


Any ideas?

Thanks

[rony]

You are using RRDTool 1.2.x and have incorrect font paths defined, either on the user or globally in settings.

[SteveG]

That makes sense but I believe the path is correct

From cacti path settings
/usr/share/rrdtool/fonts

ls /usr/share/rrdtool/fonts/ -al
-rwxrwxrwx 1 root root 60444 Jan 26 11:51 DejaVuSansMono-Roman.ttf

Looks good to me.

[SteveG]

I had to list the font in addition to the path

/usr/share/rrdtool/fonts/DejaVuSansMono-Roman.ttf

It's fixed now.

Thanks