Riverbed Steelhead Appliance - statistics

airwalk · Post by **airwalk** » Fri Feb 09, 2007 4:53 am

This set of templates could be used to monitor the following devices:

Riverbed Steelhead Appliance
- 510
- 1010
- 2010
- 3010
- 5010

HP StorageWorks Enterprise File Services WAN Accelerator
- DL320-1010 WAN Accelerator
- DL320-2010 WAN Accelerator
- DL320-510 WAN Accelerator
- DL380-3010 WAN Accelerator
- DL380-5010 WAN Accelerator

-----------------------------------------------------------

Known issues:

- CPU load OID is updated once per 1 minute while polling is performed once per 5 minutes.
- hitRate and missRate look reversed in MIB. dimension is unclear.

-----------------------------------------------------------

Suggestions and modifications are strongly welcomed!

For those interested I also attach Riverbed MIB file.

airwalk · Post by **airwalk** » Fri Feb 09, 2007 4:56 am

tail...

habenero · Post by **habenero** » Thu Jun 21, 2007 9:58 pm

What version of Cacti did you create these templates from?

Thanks

jesterman · Post by **jesterman** » Fri Aug 10, 2007 1:49 pm

Can you be a more specific on how to install this?

Thanks!

echelon360 · Post by **echelon360** » Sat Aug 11, 2007 8:34 pm

I keep getting the below mentioned error message each time i try to import the XML file.

Error:XML:Hash version does not exist

can someone pls advice on this issue?

thank you!

airwalk · Post by **airwalk** » Thu Aug 16, 2007 10:57 am

habenero wrote:What version of Cacti did you create these templates from?

Thanks

0.8.6h as I remember now.

airwalk · Post by **airwalk** » Thu Aug 16, 2007 10:58 am

jesterman wrote:Can you be a more specific on how to install this?

Thanks!

Just as any other graph templates. No other files required.

jacauc · Post by **jacauc** » Mon Oct 29, 2007 2:03 am

All my graphs work fine, except for the DataStore and Passthrough... They seem to not get data (Current: -1.#J)

I did not change anything in the template like OIDs... using it exactly as posted.

We have the Riverbed Steelhead 5010 devices with firmware 4.04:
rbt_sh 4.0.4a #76_2 2007-10-10 18:40:27 i386

Any ideas? (2nd attachment posted just to show we have data for other OIDs)

jacauc · Post by **jacauc** » Mon Oct 29, 2007 5:34 am

Nevermind....
I noticed my Devices were set up with SNMP v1.
I changed this to v2 and all is working fine now.

Thanks anyways! Great Template!

nebj00la · Post by **nebj00la** » Tue Dec 04, 2007 11:31 am

I've attached a template for Aggregate Bandwidth on Riverbed Steelheads, tested with Steelhead 1520's and 3520's.

Thanks,
nebj00la

loganbra · Post by **loganbra** » Thu Jul 03, 2008 11:45 pm

Do you know of a way to chart the amount of optimized WAN output?

bigv · Post by **bigv** » Wed Oct 01, 2008 2:28 pm

loganbra wrote:Do you know of a way to chart the amount of optimized WAN output?

How about looking at the throughput / utilisation stats on the interface (ifIndex). Maybe map LAN against WAN interface to see data coming in as compare to data going out!?
Just a suggestion!

aaronsegura · Post by **aaronsegura** » Fri Feb 06, 2009 4:48 pm

I don't know why, but when I imported the templates the data sources for "missTotal" were set to type GAUGE when they should be COUNTER.

FYI, YMMV, etc...

rbishop · Post by **rbishop** » Thu Jun 18, 2009 12:33 pm

I want to graph the temperature readings from my Steelheads. Anybody know how to do this?

Tibo · Post by **Tibo** » Mon Jul 06, 2009 9:29 am

I successfully implemented the CPU load and the connection graphs but I have an issue on the interface polling. It works and I can have graphs on the interfaces of my riverbed but from time to time, Cacti is not able to do it and I have the following warning logs:

[code]07/06/2009 03:12:29 PM - SPINE: Poller[0] Host[35] DS[522] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[522] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[515] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[516] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[517] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[518] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[519] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[520] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[520] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[521] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[521] WARNING: SNMP timeout detected [500 ms], ignoring host [/code]

I have a riverbed 5050 with 5.5.1b version and my cacti runs with 0.8.7b and 0.8.7c (we have two differents servers - one for dev, one for prod). The poller used in Cacti is "spine" configured to do a polling every 1 minutes.

Someone got this issue before?

Cacti

Riverbed Steelhead Appliance - statistics

Riverbed Steelhead Appliance - statistics

What version

Riverbed

XML Error

Re: What version

Re: Riverbed

Aggregate Bandwidth - template

Temperature

Who is online