Problems with graphs - new user, new install

[jantman]

Partially Solved!!

Believe it or not, I seem to be making progress...

I searched the forum for "duplicate ds" and happened by the post at:
http://forums.cacti.net/viewtopic.php?t=19271

I read Exo7's advice, checked my data template for Interface Traffic, and sure enough, there were two sets of data_in and data_out!

I removed one set, saved it, and now the graph for port 1 is there - and working!

[gandalf]

...

Code: Select all

02/01/2007 05:10:59 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool create /srv/www/htdocs/admin/cacti/rra/sw1_traffic_in_84.rrd   --step 300   DS:traffic_in:COUNTER:600:0:200000000  DS:traffic_out:COUNTER:600:0:200000000  DS:traffic_out:COUNTER:600:0:200000000  DS:traffic_in:COUNTER:600:0:200000000  RRA:AVERAGE:0.5:1:600  RRA:AVERAGE:0.5:6:700  RRA:AVERAGE:0.5:24:775  RRA:AVERAGE:0.5:288:797  RRA:MIN:0.5:1:600  RRA:MIN:0.5:6:700  RRA:MIN:0.5:24:775  RRA:MIN:0.5:288:797  RRA:MAX:0.5:1:600  RRA:MAX:0.5:6:700  RRA:MAX:0.5:24:775  RRA:MAX:0.5:288:797  RRA:LAST:0.5:1:600  RRA:LAST:0.5:6:700  RRA:LAST:0.5:24:775  RRA:LAST:0.5:288:797[/quote]The Data Template is broken. It defines traffic_in twice and traffic_out twice. That's not allowed. Please see [url]http://forums.cacti.net/viewtopic.php?t=6773[/url]
Reinhard

[jantman]

Ok, I removed the duplicates and now SW1 seems to be working fine.

I am having the nAn problem with EXT1, but I know you have a good HOWTO on it, so I'll use that.

Thanks for all of the help.

One last question, SW1 is a Bay Networks BayStack 450-24T switch. The bandwidth measurements are working fine, but is there any way to graph the total data transferred? i.e. by day, week, etc.?

[gandalf]

One last question, SW1 is a Bay Networks BayStack 450-24T switch. The bandwidth measurements are working fine, but is there any way to graph the total data transferred? i.e. by day, week, etc.?

See http://www.cacti.net/downloads/docs/htm ... _VARIABLES on Bandwidth Summation
Reinhard