Cisco interface operational status monitor

[mullstu]

RRDTool Command:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Cisco Router - Status - Se0/1:0" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="status" \
--slope-mode \
DEF:a="c\:/Inetpub/wwwroot/cacti/rra/cisco_router_int_status_391.rrd":int_status:AVERAGE \
AREA:a#FFC73B:"Current status\:" \
GPRINTLAST:"%8.2lf%s\n" \
COMMENT:"(1 = Up | 2 = Down)\n"

RRDTool Says:

OK

[flipflap]

check my post with the attached pic regarding cacti log file

[mullstu]

Output is show a U and not a number

[flipflap]

try running USR and paste the output here or better yet get a screen shot and paste it here. also can you show me a pic of the cacti poller log same one i posted. thanks

also can you double check the attached pics with the template you have imported

[mullstu]

01/08/2007 02:40:20 PM - CMDPHP: Poller[0] Host[28] DS[385] SNMP: v1: x.x.x.x, dsname: int_status, oid: .1.3.6.1.2.1.2.2.1.8.2, output: U

01/08/2007 02:40:20 PM - CMDPHP: Poller[0] Host[28] DS[385] WARNING: Result from SNMP not valid. Partial Result: up(1

01/08/2007 02:40:20 PM - CMDPHP: Poller[0] DEBUG: SQL Exec: "insert into poller_output (local_data_id, rrd_name, time, output) values (384, 'int_status', '2007-01-08 14:40:20', 'U')"

01/08/2007 02:40:20 PM - CMDPHP: Poller[0] Host[28] DS[384] SNMP: v1: x.x.x.x, dsname: int_status, oid: .1.3.6.1.2.1.2.2.1.8.1, output: U

01/08/2007 02:40:20 PM - CMDPHP: Poller[0] Host[28] DS[384] WARNING: Result from SNMP not valid. Partial Result: up(1

[flipflap]

can you do it via command line and see what the output is. thanks

[mullstu]

stupid question, but how do I run it from the command line?

[flipflap]

sorry about usr. it's called net-snmp i called it usr because it's the folder where its installed. download it here http://net-snmp.sourceforge.net/ . then run snmpget from command line. btw what equipment are you monitoring?

[lion_han]

I want to add this files with import templates but see: Error: XML: Hash version does not exist???

[mullstu]

We are monitoring our Cisco routers. We have a variety of routers onsite.
Any updates on what the issue may be. I am just getting back to why thei isn't working. I got side tracked by other projects.

I downloaded the snmpget, but what command line would I run.

[schouaib]

I also have the same problem with interface status monitoring, but I'm sure that the snmp agent respond with : up(1) or down(2) and not 1 or 2 !!!

need help please

thanks

[cwahlin]

I also have the same problem with interface status monitoring, but I'm sure that the snmp agent respond with : up(1) or down(2) and not 1 or 2 !!!

need help please

thanks

SNMP responds with 1 or 2 only. It's just your snmpget that is inteligent enough by understanding the MIB that translates it to up or down. Guess you might have to remove the MIB to get 1 or 2 only.

/Carl

[hwon]

Replace <source> entry to following in your interface.xml file to extract the number from snmp output:

<ifOperStatus>
<name>Status</name>
<method>walk</method>
<source>VALUE/REGEXP:[a-zA-Z]{1,}\(([1-9]{1})+\)$</source>
<direction>output</direction>
<oid>.1.3.6.1.2.1.2.2.1.8</oid>
</ifOperStatus>

[schouaib]

thnaks for reply, I changed interfaces.xml, but i have the same problem :
That's what I see in the poller log :
02/17/2007 12:45:01 PM - CACTID: Poller[0] Host[1] DS[2971] SNMP: v1: 127.0.0.1, dsname: int_status, oid: .1.3.6.1.2.1.2.2.1.8.3, value: U
02/17/2007 12:45:01 PM - CACTID: Poller[0] Host[1] DS[2971] WARNING: Result from SNMP not valid. Partial Result: ...

What should I do ?

tnx in advance

[crackrocksteady]

I had no luck with that reg expression either.

Any clues??