HP J4813A ProCurve Switch 2524

[marwooj]

Does MAC Track work with HP J4813A ProCurve Switch 2524?

[TheWitness]

Should, you will have to define it in the Device Types table and start by using "generic_swich_ports" scanning function.

TheWitness

[marwooj]

Should, you will have to define it in the Device Types table and start by using "generic_swich_ports" scanning function.

TheWitness

Yes, a have this

Code: Select all

ProCurve Switch 2524   	HP  	Switch/Hub  	J4813A  	.1.3.6.1.4.1.11

But it is not detecting any IP

But it is not detecting any IP neither for get_procurve_switch_ports nor get_generic_switch_ports.
For get_procurve_switch_ports I have :
DEBUG: HOST: hp0 is alive, processing has begun.
DEBUG: Scanning function is 'get_procurve_switch_ports'
DEBUG: VLAN data collected. There are 0 VLANS.
DEBUG: ifIndexes data collection complete
DEBUG: ifTypes data collection complete.
DEBUG: ifNames data collection complete.
DEBUG: ipAddrTable scanning for link ports data collection complete.
DEBUG: ifInterfaces assembly complete.
DEBUG: portNames data collected.

Notice: Undefined variable: active_vlans in /usr/share/cacti/site/plugins/mactrack/lib/mactrack_hp.php on line 94
INFO: HOST: hp0, TYPE: HP J4813A ProCurve Switch 2524, revision, No active devcies on this network device.
DEBUG: SQL: UPDATE mac_track_devices SET ports_total='0',device_type_id='44',scan_type = '1',vlans_total='0',ports_active='0',ports_trunk='1',macs_active='0',snmp_readstring='public',snmp_sysName='hp0',snmp_sysLocation='server room',snmp_sysContact='',snmp_sysObjectID='.1.3.6.1.4.1.11.2.3.7.11.19',snmp_sysDescr='HP J4813A ProCurve Switch 2524, revision F.05.55, ROM F.02.01 (/sw/code/build/info(s02))',snmp_sysUptime='327867238',snmp_status='3',last_runmessage='Data collection completed ok. No active devices on this network device.',last_rundate='2007-01-03 07:50:36',last_runduration='1.9658' WHERE device_id ='1'


And for 'get_generic_switch_ports' :
DEBUG: HOST: hp0, processing has begun.
DEBUG: Scanning function is 'get_generic_switch_ports'
DEBUG: ifIndexes data collection complete
DEBUG: ifTypes data collection complete.
DEBUG: ifNames data collection complete.
DEBUG: ipAddrTable scanning for link ports data collection complete.
DEBUG: ifInterfaces assembly complete.
INFO: HOST: hp0, TYPE: HP J4813A ProCurve Switch 2524, revision, TOTAL PORTS: 0, OPER PORTS: 0
DEBUG: No user ports on this network.
DEBUG: SQL: UPDATE mac_track_devices SET ports_total='0',device_type_id='44',scan_type = '1',vlans_total='0',ports_active='0',ports_trunk='0',macs_active='0',snmp_readstring='public',snmp_sysName='hp0',snmp_sysLocation='server room',snmp_sysContact='',snmp_sysObjectID='.1.3.6.1.4.1.11.2.3.7.11.19',snmp_sysDescr='HP J4813A ProCurve Switch 2524, revision F.05.55, ROM F.02.01 (/sw/code/build/info(s02))',snmp_sysUptime='327858244',snmp_status='3',last_runmessage='Data collection completed ok',last_rundate='2007-01-03 07:50:36',last_runduration='2.5869' WHERE device_id ='1'

[TheWitness]

You have other devices working correct? Also, if it's a layer3 switch, you will get IP's otherwise, you need it's corresponding router added to the system to get IP's

TheWitness

[marwooj]

all my devices are HP l2 switches
Device Tracking - MAC to IP Report View (MAC/IP Report) - is showing nothing,
just Device Tracking - Site Report View and Device Tracking - Device Report View are showing something.

[bambid]

I have HP ProCurve switches too and have problem as you.

[TheWitness]

Post the details or UPS me a switch to be loaned. I will return it. You can get my mailing address via PM.

TheWitness

[troffasky]

Post the details or UPS me a switch to be loaned. I will return it. You can get my mailing address via PM.
TheWitness

Which "the details" are you after? I have a 2650.