[HOWTO] From snmptable to Graphs (Data Query walkthrough)
Moderators: Developers, Moderators
-
- Cacti User
- Posts: 150
- Joined: Sat Jul 30, 2005 2:15 pm
Anyone want to try my handiwork?
I have created a set of templates for disk read/writes and disk load average ( for systems that support it).
- Attachments
-
- cacti-DiskIO.zip
- This zip file has all the templates.
- (14.8 KiB) Downloaded 3540 times
-
- graph_image-1.php.png (39.52 KiB) Viewed 29821 times
-
- graph_image.php.png (30.83 KiB) Viewed 29821 times
In order to Document ı create a xml file. But I didnt find index oid. I have only these OIDs:
I have these OIDs:
.1.3.6.1.4.1.6213.2.4.1.1.1
.1.3.6.1.4.1.6213.2.4.1.1.2
.1.3.6.1.4.1.6213.2.4.1.2.1
.1.3.6.1.4.1.6213.2.4.1.2.2
.1.3.6.1.4.1.6213.2.4.1.3.1
.1.3.6.1.4.1.6213.2.4.1.3.2
.1.3.6.1.4.1.6213.2.4.1.4.5
.1.3.6.1.4.1.6213.2.4.1.4.6
.1.3.6.1.4.1.6213.2.4.1.4.7
.1.3.6.1.4.1.6213.2.4.1.4.8
.1.3.6.1.4.1.6213.2.4.1.4.9
.1.3.6.1.4.1.6213.2.4.1.4.10
.1.3.6.1.4.1.6213.2.4.1.4.2
.1.3.6.1.4.1.6213.2.4.1.4.3
.1.3.6.1.4.1.6213.2.4.1.4.4
But I cant find the index oid
How can I write a XML file for these oids?
I have these OIDs:
.1.3.6.1.4.1.6213.2.4.1.1.1
.1.3.6.1.4.1.6213.2.4.1.1.2
.1.3.6.1.4.1.6213.2.4.1.2.1
.1.3.6.1.4.1.6213.2.4.1.2.2
.1.3.6.1.4.1.6213.2.4.1.3.1
.1.3.6.1.4.1.6213.2.4.1.3.2
.1.3.6.1.4.1.6213.2.4.1.4.5
.1.3.6.1.4.1.6213.2.4.1.4.6
.1.3.6.1.4.1.6213.2.4.1.4.7
.1.3.6.1.4.1.6213.2.4.1.4.8
.1.3.6.1.4.1.6213.2.4.1.4.9
.1.3.6.1.4.1.6213.2.4.1.4.10
.1.3.6.1.4.1.6213.2.4.1.4.2
.1.3.6.1.4.1.6213.2.4.1.4.3
.1.3.6.1.4.1.6213.2.4.1.4.4
But I cant find the index oid
How can I write a XML file for these oids?
here is the MIB filelvm wrote:This is hard to guess without the MIB or an snmpwalk output with the textual representation of the OIDs
Reinhard
and textual representation:
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.sessions.sessActive .1.3.6.1.4.1.6213.2.4.1.1.1 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.sessions.sessTotal .1.3.6.1.4.1.6213.2.4.1.1.2 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.requests.reqActive .1.3.6.1.4.1.6213.2.4.1.2.1 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.requests.reqTotal .1.3.6.1.4.1.6213.2.4.1.2.2 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.bytes.bytesIn .1.3.6.1.4.1.6213.2.4.1.3.1 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.bytes.bytesOut .1.3.6.1.4.1.6213.2.4.1.3.2 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.bytesSaved .1.3.6.1.4.1.6213.2.4.1.4.5 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.avgConnectionsPerDay .1.3.6.1.4.1.6213.2.4.1.4.6 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.avgRequestsPerDay .1.3.6.1.4.1.6213.2.4.1.4.7 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.avgBytesSavedPerDay .1.3.6.1.4.1.6213.2.4.1.4.8 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.avgCPUUsed .1.3.6.1.4.1.6213.2.4.1.4.9 int32
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.avgMemoryUsed .1.3.6.1.4.1.6213.2.4.1.4.10 int32
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.connectionsAccepted .1.3.6.1.4.1.6213.2.4.1.4.2 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.connectionsRefused .1.3.6.1.4.1.6213.2.4.1.4.3 counter64
.iso.org.dod.internet.private.enterprises.juniperDX.dx.dxStats.systemStats.devicePerformance.requestsProcessed .1.3.6.1.4.1.6213.2.4.1.4.4 counter64
- Attachments
-
- DX-STATS.zip
- (13.38 KiB) Downloaded 3496 times
- gandalf
- Developer
- Posts: 22383
- Joined: Thu Dec 02, 2004 2:46 am
- Location: Muenster, Germany
- Contact:
Re: Typo?
Thank you for pointing this out. I won't correct this issue here, as a new development system will "soon" be available. This HowTo was ported, too./usr/local/dick wrote:Very nice walkthrough, but there appear to be some typo's, unfortunately also in the code examples.
Sometimes you refer to hrStoragetable and sometime to hrStoragedTable (note the d).
Reinhard
JJX wrote:When i try to load the xml of the example ("Chapter I: Building raw XML file") i get these errors:
Notice: Undefined index: arg_index in /var/www/cacti/lib/data_query.php on line 98
Notice: Undefined index: script_path in /var/www/cacti/lib/data_query.php on line 98
Notice: Undefined index: arg_query in /var/www/cacti/lib/data_query.php on line 109
Notice: Undefined index: query_name in /var/www/cacti/lib/data_query.php on line 109
Notice: Undefined index: script_path in /var/www/cacti/lib/data_query.php on line 109
Warning: Cannot modify header information - headers already sent by (output started at /var/www/cacti/lib/data_query.php:98) in /var/www/cacti/host.php on line 129
any idea?
got this fixed by adding
error_reporting(E_ERROR);
as the first line of data_query.php
Luca
i went through this howto for getting the cpu load of an win server by snmp and got an error making the graph. here is the errormessage:
here is my xml file:
where is my mistake?
thx 4 help and happy new year!
Andre
Code: Select all
RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="fit-w2ks-amd - CPU Load" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="" \
--slope-mode \
DEF:a="/usr/local/cacti/rra/fitw2ksamd_cpu_load_windows_30.rrd":CPU_Load_Windows:AVERAGE \
LINE1:a#FF0000:"Procent"
RRDTool Says:
ERROR: opening '/usr/local/cacti/rra/fitw2ksamd_cpu_load_windows_30.rrd': No such file or directory
Code: Select all
<interface>
<name>Get Windows CPU Load</name>
<description>Get SNMP based Partition Information out of hrStorageTable</description>
<index_order_type>numeric</index_order_type>
<oid_index>1.3.6.1.2.1.25.3.3.1</oid_index>
<fields>
<hrProcessorLoad>
<name>Index</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>1.3.6.1.2.1.25.3.3.1.2</oid>
</hrProcessorLoad>
</fields>
</interface>
thx 4 help and happy new year!
Andre
- gandalf
- Developer
- Posts: 22383
- Joined: Thu Dec 02, 2004 2:46 am
- Location: Muenster, Germany
- Contact:
Please run from command line
to check, if the host is responding. Please prepend your OIDs in the XML file with a leading . (dot).
Reinhard
Code: Select all
snmpwalk -c <community> -v 1 <host> 1.3.6.1.2.1.25.3.3.1
Reinhard
Re: Chapter II: Insert all descriptive table columns
Just trying to understand the behavour of thise.g. the first Description will be fetched from OID = .1.3.6.1.2.1.25.2.3.1.3.1 (that is base OID = .1.3.6.1.2.1.25.2.3.1.3 together with the appended index .1 will form the complete OID .1.3.6.1.2.1.25.2.3.1.3.1.
From what I can see a "walk" on input will not have the index appended, but for output it will?
As when I was trying to get the descriptions for various CPU 5 min averages from a router for which there are multiple CPUs, the descriptions were stored amongst descriptions for other stuff. Therefore a walk would return a whole pile of unrelevant descriptions (meaning the index value was not appended to the OID)and was of no use to me. I had to use method "get" to ensure I only received the descriptions I was after based on the index values.
But if direction set to output a walk willl have index values appended?
Is this intentional?
I have a case where for the descriptions I need to retreive them based on the index value (which for input works with get), but for the actual data I do not want this, I simply want t o walk to get them:
Procedure for Devices with Multiple CPUs
http://www.cisco.com/warp/public/477/SN ... l#multiple
So I have this;
Code: Select all
<interface>
<name>Cisco EnvMon CPU</name>
<description>Get Cisco Environmental CPU Data</description>
<oid_index>.1.3.6.1.4.1.9.9.109.1.1.1.1.2</oid_index>
<fields>
<CPUStatusDescr>
<name>CPU Description</name>
<method>get</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.2.1.47.1.1.1.1.7</oid>
</CPUStatusDescr>
<CPUStatus>
<name>CPU Status</name>
<method>walk</method>
<source>value</source>
<direction>output</direction>
<oid>.1.3.6.1.4.1.9.9.109.1.1.1.1.5</oid>
</CPUStatus>
</fields>
</interface>
This works fine for the descriptions, but for the output it's appending the index and it breaks..for the output I merely want to walk that oid!
(as in the index is only valid for fetching the descriptions, using the index for the output breaks it!)
So given the multicpu oid setup as described by the Cisco document I have linked to (where the description index is different tothat of the actual value index), is what I'm trying to accomplish possible?
Given this is my first attempt at doing an indexed SNMP data query I'm not sure if what I'm attempting is going to work or if I'm going to ahve to resort to excluding descriptions and rely on a human to enter them manually at point of graph creation?
Sure.gandalf wrote:Please post snmpwalks of the OIDs used so I can understand better
Reinhard
Ok to grab the actual CPU 5 min averages I can walk this:
Code: Select all
snmpwalk -v 2c -c public x.x.x.x 1.3.6.1.4.1.9.9.109.1.1.1.1.5
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.1 = Gauge32: 10
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.2 = Gauge32: 6
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.3 = Gauge32: 1
Code: Select all
snmpwalk -v 2c -c public x.x.x.x .1.3.6.1.4.1.9.9.109.1.1.1.1.2
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.2.1 = INTEGER: 3017
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.2.2 = INTEGER: 3001
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.2.3 = INTEGER: 1009
Code: Select all
snmpget -v 2c -c public x.x.x.x .1.3.6.1.2.1.47.1.1.1.1.7.3017
SNMPv2-SMI::mib-2.47.1.1.1.1.7.3017 = STRING: "CPU of Routing Processor 5"
Code: Select all
snmpget -v 2c -c public x.x.x.x .1.3.6.1.2.1.47.1.1.1.1.7.3001
SNMPv2-SMI::mib-2.47.1.1.1.1.7.3001 = STRING: "CPU of Switching Processor 5"
Code: Select all
snmpget -v 2c -c public x.x.x.x .1.3.6.1.2.1.47.1.1.1.1.7.1009
SNMPv2-SMI::mib-2.47.1.1.1.1.7.1009 = STRING: "CPU of Sub-Module 1 CFC Card"
SO that's the problem. I can get the descriptions working by using .1.3.6.1.4.1.9.9.109.1.1.1.1.2 for the index. But then I can't fetch the CPU values. So as seen in my xml file, the descriptions arn't the problem.
So, when the index value is appended to the oid I want to walk to get the CPU values, it of course breaks (as that index is only valid for retreiving the descriptions). That's when I discovered that there appears to be different behaviour for get and walk in the xml interface depending on direction. For input if I do a walk it does not append index. As i if I did a walk for descriptions oid then it would retrive the whole list of everything. If I changed method to get then it did what I want. But for the output section, a walk does have the index value appended. And if using the index used to fetch the descriptions, it will break.
Hope that makes sense.
And cheers for any help, even if it's a " can't be done due ot the way they have implemented this on the 76s". At least then I know and wont worry about it any longer
Oh, and yeah if you just walk 1.3.6.1.2.1.47.1.1.1.1.7 (the oid used to get descriptions) then you get descriptions for all kinds of stuff:
Code: Select all
snmpwalk -v 2c -c public x.x.x.x .1.3.6.1.2.1.47.1.1.1.1.7
SNMPv2-SMI::mib-2.47.1.1.1.1.7.1 = STRING: "CISCO7606-S"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.2 = STRING: "Physical Slot 1"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.3 = STRING: "Physical Slot 2"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.4 = STRING: "Physical Slot 3"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.5 = STRING: "Physical Slot 4"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.6 = STRING: "Physical Slot 5"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.7 = STRING: "Physical Slot 6"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.8 = STRING: "Backplane"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.9 = STRING: "fan-tray 1 fan-fail Sensor"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.10 = STRING: "Container of Fan FRU 1"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.11 = STRING: "FAN-MOD-6SHS 1"
SNMPv2-SMI::mib-2.47.1.1.1.1.7.12 = STRING: "Container of Container of Power Supply"
Who is online
Users browsing this forum: No registered users and 0 guests