SmokePing Problems

[spencerc]

Hey I am quite new to cacti, but have alot of the graphs I need working however I am having issues with smokeping. For that matter I can not get the advanced ping or the ping to work. It never seems to create a graph. I keep seeing mention of scripts. What are the scripts for, where do i have to put them so cacti can use them.

Any advice on how to get it working would be greatly appreciated

I am using debian Linux 2.4.27-3-386
Cacti 8.6i

I changed the poller so that it is being run by root.

When I look at the graph and turn on the debugger I get the following error
ERROR: invalid rpn expression 'a,g,-,0.2,*'

I am using the cacti_graph_template_smoke_ping_228.xml for a template. I did not see a newer one is this the latest and correct one to use

how do i clear up the error?

Here is the debug

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="smsserv - Smoke Ping" \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit=10 \
--lower-limit=0 \
--units-exponent=1 \
--vertical-label="milliseconds" \
DEF:a="/usr/share/cacti/site/rra/smsserv_loss_53.rrd":avg:AVERAGE \
DEF:b="/usr/share/cacti/site/rra/smsserv_loss_53.rrd":max:AVERAGE \
DEF:c="/usr/share/cacti/site/rra/smsserv_loss_53.rrd":min:AVERAGE \
DEF:d="/usr/share/cacti/site/rra/smsserv_loss_53.rrd":loss:AVERAGE \
DEF:e="/usr/share/cacti/site/rra/smsserv_loss_53.rrd":max:MAX \
CDEF:cdefb=b,a,-,0.2,* \
CDEF:cdefh=a,g,-,0.2,* \
CDEF:cdefbc=e,0,* \
CDEF:cdefbd=bc,0,GT,UNKN,a,IF \
CDEF:cdefbe=bc,0,GT,bc,40,GT,UNKN,g,IF,UNKN,IF \
CDEF:cdefbf=bc,40,GT,bc,80,GT,UNKN,g,IF,UNKN,IF \
CDEF:cdefbg=bc,UN,1,EQ,TIME,300,+,NOW,GT,UNKN,INF,IF,bc,80,GT,INF,UNKN,IF,IF \
CDEF:cdefbh=d,UN,1,EQ,TIME,300,+,NOW,GT,100,0,IF,100,d,-,IF \
AREA:a#FFFFFF:"" \
STACK:cdefb#333333:"" \
STACK:cdefb#555555:"" \
STACK:cdefb#888888:"" \
STACK:cdefb#AAAAAA:"" \
STACK:cdefb#CCCCCC:"" \
AREA:c#FFFFFF:"" \
STACK:cdefh#CCCCCC:"" \
STACK:cdefh#AAAAAA:"" \
STACK:cdefh#888888:"" \
STACK:cdefh#555555:"" \
STACK:cdefh#333333:"" \
AREA:cdefbc#FFFFFF:"" \
LINE1:cdefbd#00CF00:"Up" \
AREA:cdefbe#4123A1:"Packet loss \: 1 -> 40 %" \
AREA:cdefbf#8F005C:"Packet loss 41 -> 80 %" \
AREA:cdefbg#FF0000:"Down\n" \
GPRINT:cdefbh:AVERAGE:"Success rate \:%8.2lf %%\n" \
COMMENT:"Response time :" \
GPRINT:c:MIN:"Minimum \:%8.2lf ms" \
GPRINTAVERAGE:"Average \:%8.2lf ms" \
GPRINT:e:MAX:"Maximum \:%8.2lf ms\n"

RRDTool Says:

ERROR: invalid rpn expression 'a,g,-,0.2,*'

[TheWitness]

This is a known issue. I thought that a revised template had been released, but I believe you need to edit the CDEF and change the "g" to an "e".

TheWitness

[spencerc]

now I am recieving the following error

ERROR: invalid rpn expression 'bc,0,GT,UNKN,a,IF'