gotten these to work right? I'd like to set them up to view each graph by port. I was wondering if anyone was successful with doing this? If so, was there a custom template used?
Here are some of the PowerConnect models:
3324
3348
3424
5224
5324
Anyone have any luck?
Dell Switches... Has anyone...
Moderators: Developers, Moderators
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Do these support SNMP? If so, you should be able to use the standard interface graphs on the switch.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
3324 issues
I was able to get a 3324 to work for a few months. Then one day a few weeks ago it just stopped displaying any graph data. I would run the verbose query and it responded, and it always shows 100% uptime...
Right now I'm rebuilding the graphs, etc;
For some reason these Dell switches (which run on a very Cisco-like ios) don't play well with Cacti.
Right now I'm rebuilding the graphs, etc;
For some reason these Dell switches (which run on a very Cisco-like ios) don't play well with Cacti.
Who is online
Users browsing this forum: No registered users and 2 guests