BUG OR NO BUG?

[spades911]

The total in bandwidth is not displaying.

Code: Select all

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Cisco C2900XL-3 - Traffic - Fa0/4" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bytes per second" \
--slope-mode \
DEF:a="/home/cacti/public_html/cacti/rra/c2900xl3_traffic_in_267.rrd":traffic_in:AVERAGE \
DEF:b="/home/cacti/public_html/cacti/rra/c2900xl3_traffic_in_267.rrd":traffic_out:AVERAGE \
AREA:a#00CF00:"Inbound"  \
GPRINT:a:LAST:" Current\:%8.2lf %s"  \
GPRINT:a:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:a:MAX:"Maximum\:%8.2lf %s"  \
COMMENT:"Total In\:  13.54 MB\n"  \
LINE1:b#002A97:"Outbound"  \
GPRINT:b:LAST:"Current\:%8.2lf %s"  \
GPRINT:b:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:b:MAX:"Maximum\:%8.2lf %s"  \
COMMENT:"Total Out\: 4.13 MB"

[spades911]

Image attached!

[spades911]

If you look at the image, you will notice "Total In:" is not going down to the next line.

[spades911]

Change width to 700 from 500 in graph template

[TheWitness]

I would say, reduce you font size a bit.

TheWitness

[streaker69]

I would add an <hr> at the end of your Total In Max value.

[rony]

I would add an <hr> at the end of your Total In Max value.

Bingo... Everytime I login to someone system that is having issues and I see them using this template, I let them know I'm fixing it.

To fix it, enable the HR after the two max graph items in the template.