Broken graphs if traffic is over 800Mbps

pinkpanther · Post by **pinkpanther** » Sat Oct 28, 2006 3:42 pm

Hi, I'm having a strange problem. If the traffic is over 800Mbps, the graph is broken. See the attached graph.

I'm using cacti 0.8.6h on FreeBSD, with rrd tool 1.2.12_1.
Any ideas?

issmsatch · Post by **issmsatch** » Sat Oct 28, 2006 5:54 pm

The data template have a maximum value field. Is your reading exceeding that?

pinkpanther · Post by **pinkpanther** » Sat Oct 28, 2006 6:02 pm

"Use per-data Source Value" is checked, so I suppose the graph should follow the source value. Anyway, the source value in the field is set to 1,000,000.

issmsatch · Post by **issmsatch** » Sat Oct 28, 2006 7:33 pm

This might help:
http://forums.cacti.net/viewtopic.php?t=15136

You can use rrdtool to check the rra file for readings or missing readings. Maybe run debug & check the logs to see if the readings are missing in the log as well.

Don't forget to turn off debug or the cacti log file will get very large over time.

pinkpanther · Post by **pinkpanther** » Sun Oct 29, 2006 4:54 pm

after changing the template to accept data over 1gig and re-creating the graphs the problem gets solved. thank you.

Cacti

Broken graphs if traffic is over 800Mbps

Broken graphs if traffic is over 800Mbps

Who is online