No SNMP data returned on a HP 2524 on a different net.

[affeee]

Hi

I am trying to pull some info in cacti from a switch on another network.

All i am getting is this:

Code: Select all

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ No SNMP data returned
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/interface.xml'

But when i run from the same machine:

Code: Select all

snmpwalk -v 2c -c public 213.115.xxx.xxx .1.3.6.1.2.1.2.2.1.1

I get:

Code: Select all

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifIndex.5 = INTEGER: 5
IF-MIB::ifIndex.6 = INTEGER: 6
IF-MIB::ifIndex.7 = INTEGER: 7
IF-MIB::ifIndex.8 = INTEGER: 8
IF-MIB::ifIndex.9 = INTEGER: 9
IF-MIB::ifIndex.10 = INTEGER: 10
IF-MIB::ifIndex.11 = INTEGER: 11
IF-MIB::ifIndex.12 = INTEGER: 12
IF-MIB::ifIndex.13 = INTEGER: 13
IF-MIB::ifIndex.14 = INTEGER: 14
IF-MIB::ifIndex.15 = INTEGER: 15
IF-MIB::ifIndex.16 = INTEGER: 16
IF-MIB::ifIndex.17 = INTEGER: 17
IF-MIB::ifIndex.18 = INTEGER: 18
IF-MIB::ifIndex.19 = INTEGER: 19
IF-MIB::ifIndex.20 = INTEGER: 20
IF-MIB::ifIndex.21 = INTEGER: 21
IF-MIB::ifIndex.22 = INTEGER: 22
IF-MIB::ifIndex.23 = INTEGER: 23
IF-MIB::ifIndex.24 = INTEGER: 24
IF-MIB::ifIndex.25 = INTEGER: 25
IF-MIB::ifIndex.26 = INTEGER: 26
IF-MIB::ifIndex.29 = INTEGER: 29
IF-MIB::ifIndex.4124 = INTEGER: 4124

What is wrong here?

Thx

[affeee]

bump on this

[affeee]

Ok.

Went back to MRTG, where this is working fine.

Over and out.