RRD file is updated, however graph is blank

Post by **TheWitness** » Thu Jul 20, 2006 5:39 am

You should walk the ifinexes by hand when you are having the problem. What I can tell you is that some hosts have issues with their snmp agents. For example, in HPUX 10, the interface reporting would break as soon as you started using it. You should contact the hardware vendor as well.

You can paste the walk here though.

TheWitness

techie411 · Post by **techie411** » Fri Jul 21, 2006 7:19 pm

I see this error in the logs. It did this when I tried to create a graph. I also searched & found the patch at "http://www.cacti.net/downloads/patches/ ... a_id.patch" & I applied it & still receiving the error. Would you happen to know what this means?

07/21/2006 05:15:09 PM - CMDPHP: Poller[0] ERROR: SQL Exec Failed "update data_template_data set rrd_maximum='|query_ifSpeed|' where local_data_id=195"

Post by **TheWitness** » Sat Jul 22, 2006 12:20 am

There is a patch for this however, not released on the web site.

TheWitness

techie411 · Post by **techie411** » Thu Aug 24, 2006 7:04 pm

Are there any issues w/ 64bit OS servers & reading snmp interface data? This seems to be an issue w/ just the 64 bit CPU servers.

Post by **TheWitness** » Sun Aug 27, 2006 11:01 pm

It's not a CPU or 64-bit OS issue, it is the agents ability to use a 64 bit integer register to provide interface counter data to the poller.

TheWitness

techie411 · Post by **techie411** » Tue Aug 29, 2006 2:39 pm

So what other alternatives can I do in order to create the interface graph. Thank you.

Post by **TheWitness** » Tue Aug 29, 2006 10:52 pm

Reduce your poller interval and use 32bit

Cacti

RRD file is updated, however graph is blank

Who is online