Windows All-In-One Installer [Cacti 1.2.24] [Updated 2023-03-09]

kuririkura · Post by **kuririkura** » Thu Aug 10, 2006 12:27 am

I've follow your step and post install step too, but i can't get in the cacti
i've used
username: admin
password: admin
but the message is as follow :
"Invalid User Name/Password Please Retype:"
How can i get in or change the admin password??/
thanks.

BSOD2600 · Post by **BSOD2600** » Thu Aug 10, 2006 10:42 am

The passwords were located at the last screen of the installer. You should pay more attention.

user: admin
pw: cactipw

DaveHope · Post by **DaveHope** » Wed Aug 16, 2006 5:03 am

I changed the install path (since the Installed allowed it..) to C:\Cacti\, after editing the config files I've got a weird issue. Graphs arn't generated.

Cacti log shows nothing, the only bits of Info I get are from the Poller cache, which shows:

View Poller Cache [22 Items]
Data Source: 81.29.85.145 - Used Space - D: Label: Seri
RRD: C:\Cacti\Inetpub\wwwroot\cacti\rra\81_29_85_145_hdd_total_20.rrd
Action: 2, Script: C:\Cacti\Inetpub\wwwroot\cacti\scripts\ss_host_disk.php ss_host_disk 81.29.85.145 5 1:161:500:public:::MD5::[None] get total 3

Those files don't seem to get created.

Any thoughts?

BSOD2600 · Post by **BSOD2600** » Wed Aug 16, 2006 10:36 am

The installer must have the root of the drive letter you want to install it on. This is because then it takes that initial path and bases all the other paths for php, cactid, rrdtool, mysql, and IIS off of it.

Maybe in time, the installer will allow you to specify separate paths for each component.

DaveHope · Post by **DaveHope** » Thu Aug 17, 2006 3:54 am

hrm. I seem to be experiencing the same problem when using the root of C, doesn't seem to be creating entries in the rra folder. Permissions seem correct.

Any ideas where I can look to debug ?

BSOD2600 · Post by **BSOD2600** » Thu Aug 17, 2006 10:39 am

1) What OS?
2) Did you run the uninstaller before reinstalling?
3) Look in c:\inetpub\wwwroot\cacti\logs\ for additional logs that were created by the installer. Any errors in them?
4) Why did you edit the config files? It's already completely set up.
5) Did you restart the server after reinstalling cacti?
6) Go to Graph Mangement. Click on a graph. In the top right corner, enable Graph Debugging. Does rrdtool report an error?

DaveHope · Post by **DaveHope** » Fri Aug 18, 2006 5:19 am

1: Windows Server 2003 Standard Edition
2: yes
3: Nothing in there other than the default content.
4: I edited config files when trying to install in c:\Cacti\, not this time. Just a normal install
5: Yes
6: It does indeed, it reports

ERROR: opening 'C:/Inetpub/wwwroot/cacti/rra/81_29_85_144_cpu_14.rrd': No such file or directory

The file does not exist, full control has been granted to iusr, network service and iis_wpg.

BSOD2600 · Post by **BSOD2600** » Fri Aug 18, 2006 10:43 am

DaveHope wrote:ERROR: opening 'C:/Inetpub/wwwroot/cacti/rra/81_29_85_144_cpu_14.rrd': No such file or directory

Follow the steps in here to troubleshoot that problem: http://forums.cacti.net/viewtopic.php?t=11747

DaveHope · Post by **DaveHope** » Mon Aug 21, 2006 3:14 am

Hrm, no permission denied issues. Though, I do get some seemingly incorrect file access.

http://files.davehope.co.uk/cacti.png

BSOD2600 · Post by **BSOD2600** » Mon Aug 21, 2006 11:48 am

Double check your path to rrdtool.exe in cacti, I bet it's invalid. You must specify the FULL path (i.e. c:\rrdtool\rrdtool.exe).

Make sure you also rebooted the server before trying to get cacti to work.

DaveHope · Post by **DaveHope** » Tue Aug 22, 2006 7:20 am

hrm. Weird. It has all of a sudden randomly started working. Ohh well

jdrinkert · Post by **jdrinkert** » Thu Aug 24, 2006 11:36 am

rallen wrote: The problem I am having right now is when I try to run php c:\inetpub\wwwroot\cacti\poller.php from the prompt, I get the following error:

PHP Warning: PHP Startup: Unable to load dynamic library 'c:\php\ext\php_snmp.dll' - The specified module could not be found.
in Unknown on line 0
OK u:0.01 s:0.01 r:5.05
07/20/2006 04:20:04 PM - SYSTEM STATS: Time:6.1221 Method:cmd.php
Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:2 RRDsProcessed:1

I checked to make sure that .dll file does exist and that the user account I'm logged in with has permissions for it. Any suggestions on what I can check? Thanks!

I'm experiencing the same problem. Each time the poller runs this message displays. I'm running it on a Win2003 Server.

Everything is running fine though except when in tree mode the graphs don't display. In Preview Mode and List Mode they display properly.

BSOD2600 · Post by **BSOD2600** » Thu Aug 24, 2006 1:34 pm

Run a chkdsk c: /f. Look in the event logs afterwards -- did it fix anything? Is the file actually in that location? What version does it say?

mrpolaris · Post by **mrpolaris** » Sat Aug 26, 2006 12:29 am

What was the User/password for the windows msi installer version when you goto the website

BSOD2600 · Post by **BSOD2600** » Sat Aug 26, 2006 1:03 am

As documented on the last page of the installer which you did not read AND one of the windows installer download sites...

user: admin
pw: cactipw

Cacti

Windows All-In-One Installer [Cacti 1.2.24] [Updated 2023-03-09]

Username and password

php_snmp.dll

Windows installer

Who is online