snmp query problem

[khm]

because of my english is not very good and my problem is difficult to explain i tried with examples:

Part of snmp walk:

4.1.231.2.10.2.2.3.1.1.1.2.1.2 = 2
4.1.231.2.10.2.2.3.1.1.1.2.1.3 = 2
4.1.231.2.10.2.2.3.1.1.1.4.1.1 = 4
4.1.231.2.10.2.2.3.1.1.1.4.4.4 = 4
4.1.231.2.10.2.2.3.1.1.2.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.2.2.1.3 = 1
4.1.231.2.10.2.2.3.1.1.2.4.1.1 = 1
4.1.231.2.10.2.2.3.1.1.2.4.4.4 = 4
4.1.231.2.10.2.2.3.1.1.3.2.1.2 = 2
4.1.231.2.10.2.2.3.1.1.3.2.1.3 = 3
4.1.231.2.10.2.2.3.1.1.3.4.1.1 = 1
4.1.231.2.10.2.2.3.1.1.3.4.4.4 = 4
4.1.231.2.10.2.2.3.1.1.5.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.5.2.1.3 = 1
4.1.231.2.10.2.2.3.1.1.5.4.1.1 = 1
4.1.231.2.10.2.2.3.1.1.5.4.4.4 = 1
4.1.231.2.10.2.2.3.1.1.6.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.6.2.1.3 = 0
4.1.231.2.10.2.2.3.1.1.6.4.1.1 = 0
4.1.231.2.10.2.2.3.1.1.6.4.4.4 = 2
4.1.231.2.10.2.2.3.1.1.7.2.1.2 = atapi
4.1.231.2.10.2.2.3.1.1.7.2.1.3 = atapi
4.1.231.2.10.2.2.3.1.1.7.4.1.1 = pciide
4.1.231.2.10.2.2.3.1.1.7.4.4.4 = fasttx2k
4.1.231.2.10.2.2.3.1.1.8.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.8.2.1.3 = 0
4.1.231.2.10.2.2.3.1.1.8.4.1.1 = 0
4.1.231.2.10.2.2.3.1.1.8.4.4.4 = 2

There is a problem to get indexed SNMP-Data with snmp_query.
I tried several xml-files but no chance.
It seemed to be the changing oids within a variable.
Example (sniHDAdapterType 2=isa, 4=pci):
4.1.231.2.10.2.2.3.1.1.1.2.1.2 = 2
4.1.231.2.10.2.2.3.1.1.1.2.1.3 = 2
4.1.231.2.10.2.2.3.1.1.1.4.1.1 = 4
4.1.231.2.10.2.2.3.1.1.1.4.4.4 = 4
These Variables are now inserted in all other varaibles.

any ideas ?

[gandalf]

First, please name the device you're dealing with.
Second, see the last (or perhaps last two) link(s) of my signature for some HowTo. But it seems to me, that you're dealing with a three-dimensional index. Such things will require advanced OID/REGEXP magic as shown in
http://forums.cacti.net/viewtopic.php?t ... gexp+index
and
http://forums.cacti.net/viewtopic.php?t ... gexp+index
Reinhard

[khm]

First: It is a Server (Fujitsu-Siemens RX100S2 or RX300S2)
Second: I cant solve this problem with this howtos without help.

4.1.231.2.10.2.2.3.1.1.5.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.5.2.1.3 = 1
4.1.231.2.10.2.2.3.1.1.5.4.1.1 = 1
4.1.231.2.10.2.2.3.1.1.5.4.4.4 = 1

I tried to get these Values but because of the different oid 5.2.1.2 and 5.4.1.1 i dont get it.
How can i get the part of oid "2.1" or "4.1" or "4.4" in these requests ?
Please see attached files below please.
iI tried REGEXP but dont work.

[gandalf]

Well, both DEBUG and XML look very well to me. The XML cathes the three-dim index and the DEBUG show all values for <direction>input</direction> as expected. There's actually only one "output" field in the XML that may be graphed. Is this on purpose? WOuld you please tell us, what output should be graphed (as all OIDs are given numerical, I can't figure out what they mean and I'm too lazy to read the whole MIB)
Reinhard

[khm]

Thank you for answering.
Yes there is only ONE Output-Varable.
Its very simple i need the numeric value of following OIDs:

4.1.231.2.10.2.2.3.1.1.5.2.1.2 = 1
4.1.231.2.10.2.2.3.1.1.5.2.1.3 = 1
4.1.231.2.10.2.2.3.1.1.5.4.1.1 = 1
4.1.231.2.10.2.2.3.1.1.5.4.4.4 = 1
problems are these------^^ two digits!! because they are not identical
for each Device. Here is BusType and BusNumber implemented!!
I only need the numeric value here "1".
Look at the Pollers Cache only 4.1.231.2.10.2.2.3.1.1.5.2 or
4.1.231.2.10.2.2.3.1.1.5.3 or 4.1.231.2.10.2.2.3.1.1.5.1 or 4.1.231.2.10.2.2.3.1.1.5.4 are polled but not like above. "2.1", "2.1", "4.1" and "4.4" are left out.
This is a bit field discribed below in my attached file. This attached file is not the complete MIB. I have only the important part included.

[quote="lvm"]Well, both DEBUG and XML look very well to me. The XML cathes the three-dim index and the DEBUG show all values for [b]<direction>input</direction>[/b] as expected. There's actually only one "output" field in the XML that may be graphed. Is this on purpose? WOuld you please tell us, what output should be graphed (as all OIDs are given numerical, I can't figure out what they mean and I'm too lazy to read the whole MIB)
Reinhard[/quote]

[gandalf]

Please append another .1 to your oid_index to read

Code: Select all

<oid_index>.1.3.6.1.4.1.231.2.10.2.2.3.1.1.1</oid_index>

an retry.
Reinhard

[khm]

Thanks...
It works now.

Pleae append another .1 to your oid_index to read

Code: Select all

<oid_index>.1.3.6.1.4.1.231.2.10.2.2.3.1.1.1</oid_index>

an retry.
Reinhard

[gandalf]

Fine. Would it be an option to publish your templates, perhaps along with some words and a nice screenshot, in the Scripts and Templates forum?

cheers
Reinhard