Graphs displaying then dissapearing after loading

Post support questions that relate to the Windows 2003/2000/XP operating systems.

Moderators: Developers, Moderators

Post Reply
flail
Posts: 16
Joined: Fri Jul 21, 2006 9:14 pm
Contact:
Contact flail

Graphs displaying then dissapearing after loading

Post by flail »

I keep getting an error when I try to post.

I've attached my post as a text file to this thread.

Thanks guys :S
Attachments
cacti-graph_issues.txt
My actual post - something must be wrong with what's in there.
(2.13 KiB) Downloaded 134 times
cacti-one_cycle-log.txt
A single polling cycle log, with Debug enabled
(32.66 KiB) Downloaded 109 times
Top
User avatar
BSOD2600
Cacti Moderator
Posts: 12171
Joined: Sat May 08, 2004 12:44 pm
Location: USA

Post by BSOD2600 »

Looks like you're close to getting it working. If you manually run the rrdtool command and pipe the output to a png file, is it a valid image? Since you used the windows installer, you'll want to keep the rrdtool version at 1.2.

Have you restarted the server since installing?
Did you follow the post-install instructions?
Top
flail
Posts: 16
Joined: Fri Jul 21, 2006 9:14 pm
Contact:
Contact flail

Post by flail »

BSOD2600 wrote:Looks like you're close to getting it working. If you manually run the rrdtool command and pipe the output to a png file, is it a valid image? Since you used the windows installer, you'll want to keep the rrdtool version at 1.2.

Have you restarted the server since installing?
Did you follow the post-install instructions?
Hey BSOD, thanks for the response.

I've tried a couple of things since posting. I've tried to change the RRDTool version to 1.2.12 instead of 1.2.15, and now I am getting all graphs, however there is just no data!

I've attached a screenshot showing what I see now when I put the graphs on Debug Mode.

It's like it's either not creating the rrd file correctly, snmp is busted, or rrdtool isn't getting the right input :(

I've followed all install and post-install instructions, and I think I am doing everything right.

Any ideas?
Attachments
This is just a sample graph, and what cacti tells me about it.
This is just a sample graph, and what cacti tells me about it.
broken_rrdtool.JPG (76.83 KiB) Viewed 2048 times
Top
flail
Posts: 16
Joined: Fri Jul 21, 2006 9:14 pm
Contact:
Contact flail

Post by flail »

BSOD2600 wrote:If you manually run the rrdtool command and pipe the output to a png file, is it a valid image?
What syntax should I give it?
BSOD2600 wrote:Have you restarted the server since installing?
Did you follow the post-install instructions?
Yes and Yes.

If it's getting this far, it wouldn't be a problem with the PHP or mysql installation would it? Considering the GUI all works fine...
Top
flail
Posts: 16
Joined: Fri Jul 21, 2006 9:14 pm
Contact:
Contact flail

Post by flail »

I do not have anything configured for the font fields for RRDTool. Do I need to put anything in these? Is this perhaps why the graphs have no text, or is it more likely to be related to the fact RRDTool isn't working correctly?
Top
User avatar
BSOD2600
Cacti Moderator
Posts: 12171
Joined: Sat May 08, 2004 12:44 pm
Location: USA

Post by BSOD2600 »

That red spike means you've been collecting data. Yes, you need to specify a valid rrdtool font+path, that is why you do not have any text.
Top
flail
Posts: 16
Joined: Fri Jul 21, 2006 9:14 pm
Contact:
Contact flail

Post by flail »

It's all working now!!

Thanks for your help BSOD, I think it was just a matter of setting up the rrdtool font and leaving my system run for a while.

For some reason I didn't get any graph data until about 2am this morning. Weird...

Oh well, it's all working now so I am a happy little camper. Now on to suss out pulling perfmon data out of my system into it ;)
Top
Post Reply

Return to “Help: Windows Specific”

Who is online

Users browsing this forum: No registered users and 0 guests